Look-up in Google Scholar
Title: Influencia del tiempo y densidad de corriente para la remoción de DBO y turbidez de efluentes de industrtia papelera por electrocoagulación
Advisor(s): Saldaña Saavedra, Segundo Juan
Issue Date: 2019
Institution: Universidad Nacional de Trujillo
Abstract: La presente investigación estudió la influencia del tiempo y la densidad de corriente para la remoción de Demanda Bioquímica de Oxígeno (DBO5) y turbidez del efluente procedente de la máquina papelera de la empresa papelera TRUPAL S.A, aplicando un tratamiento de electrocoagulación. El proceso se llevó a cabo a diferentes tiempos de tratamiento (40, 60 y 80 min) y diferentes densidad de corriente (5,23; 10,45; 15,66 y 20,90 mA/cm2). Se utilizó un reactor de material de vidrio tipo batch de 2,6 L de capacidad, así mismo, se utilizaron tres electrodos de hierro como cátodo y tres electrodos de aluminio como ánodo conectados en paralelo a una distancia entre electrodos de 1cm. Se trabajó con un pH establecido de 5 y con un agitador magnético para evitar la polarización de la muestra durante el tratamiento. De los resultados obtenidos se determinó que el incremento del tiempo y la densidad de corriente influyen significativamente e incrementan el porcentaje de remoción para DBO5 y turbidez. Ello se puede verificar con el análisis de varianza ANOVA para un nivel de confianza del 95 % donde hubo una mayor remoción de turbidez del 99,35 % a un tiempo de 60 min y una densidad de corriente de 20,90 mA/cm2 así mismo se logró una remoción de DBO5 del 86,22 % a un tiempo de 80 min y una densidad de corriente de 10,45 mA/cm2 del efluente procedente de la máquina papelera
Note: The present investigation studied the influence of time and current density for the removal of Biochemical Oxygen Demand (BOD5) and turbidity of the effluent from the paper machine of the paper company TRUPAL S.A, applying an electrocoagulation treatment. The process was carried out at different treatment times (40, 60 and 80 min) and different current density (5, 23; 10, 45; 15, 66 and 20, 90 mA/cm2). A 2, 6 L capacity batch glass material reactor was used, likewise, three iron electrodes were used as cathode and three aluminum electrodes as anode connected in parallel at a distance between electrodes of 1cm. We worked with an established pH of 5 and with a magnetic stirrer to avoid polarization of the sample during the treatment. From the results obtained, it was determined that the increase in time and current density significantly influence and increase the removal percentage for BOD5 and turbidity. Which can be verified with the ANOVA analysis of variance for a 95 % confidence level where there was a higher 99,35 % turbidity removal at a time of 60 min and a current density of 20,90 mA /cm2 likewise a BOD5 removal of 86,22 % was achieved at a time of 80 min and a current density of 10,45 mA / cm2 of the effluent from the paper machine
Discipline: Ingeniería Ambiental
Grade or title grantor: Universidad Nacional de Trujillo. Facultad de Ingeniería Química
Grade or title: Ingeniero Ambiental
Register date: 26-Sep-2019; 26-Sep-2019



This item is licensed under a Creative Commons License Creative Commons