Look-up in Google Scholar
Title: Influencia de la adición de fibras de acero wirand ff3, en las propiedades físicas y mecánicas del concreto cemento – arena, Iquitos, Perú – 2022
Advisor(s): Irigoin Cabrera, Ulises Octavio; Morales Aquituari, Claudia de Jesús
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.00
Issue Date: 1-Sep-2023
Institution: Universidad Científica del Perú
Abstract: La tesis denominada, “INFLUENCIA DE LA ADICIÓN DE FIBRAS DE ACERO WIRAND FF3, EN LAS PROPIEDADES FÍSICAS Y MECÁNICAS DEL CONCRETO CEMENTO – ARENA, IQUITOS, PERÚ - 2022”, es una investigación de diseño experimental, transeccional correlacional, con 162 probetas, repartidas en mitades iguales, entre diseño patrón de concreto de 210 kg/cm2, a/c 0.60, de 15cmx15cm, con verificación de resistencia a los 7 y 28 días, sin adición de fibras de acero y con muestra de investigación con adición de fibras de acero de 15 kg/m3, 25kg/m3 y 35kg/m3, verificación 7 y 28 días, se encontró que: Tras la realización de los ensayos, siguiendo el método científico, se encontró los valores promedios alcanzados a los 28 días, en resistencia a la flexión; 41kg/cm2 con adición de 15kg/m3 de fibra de acero, 43 kg/cm2 con adición de 25kg/m3 de fibra de acero y 45kg/cm2 con adición de 35kg/m3 de fibra de acero. Así también. La resistencia a la compresión alcanzó su valor máximo de 271kg/cm2, a los 28 días con el diseño de adición de 15kg/m3 de fibras de acero, y 268kg/cm2 con el diseño de adición de 35kg/m3. Así mismo, muestra una resistencia a la tracción indirecta con su máximo valor de 36.1kg/cm2 a los 28 días, con adición de 25kg/m3 de fibras de acero, y un módulo elástico que se incrementa con la adición de fibras de acero tipo Wirand FF3, que notoriamente evidencia la influencia de la adición de estas, en las propiedades físicas y mecánicas del concreto cemento- arena, fabricado en Iquitos, con lo cual la hipótesis general queda confirmada.

The thesis called, "INFLUENCE OF THE ADDITION OF WIRAND FF3 STEEL FIBERS, ON THE PHYSICAL AND MECHANICAL PROPERTIES OF CONCRETE CEMENT - SAND, IQUITOS, PERU - 2022", is an experimental, correlational transectal design investigation, with 162 concrete test specimens, distributed in equal parts, between concrete pattern design of 210 kg/cm2, w/c 0.60, 15cmx15cm, with resistance verification at 7 and 28 days, without addition of steel fibers and with research sample with addition of steel fibers. steel of 15 kg/m3, 25kg/m3 and 35kg/m3, verification 7 and 28 days, it was found that After carrying out the tests, following the scientific method, the average values reached after 28 days were found in flexural resistance; 41kg/cm2 with the addition of 15kg/m3 of steel fiber, 43 kg/cm2 with the addition of 25kg/m3 of steel fiber and 45kg/cm2 with the addition of 35kg/m3 of steel fiber. So too. The compressive strength reached its maximum value of 271kg/cm2 at 28 days with the design adding 15kg/m3 of steel fibers, and 268kg/cm2 with the design adding 35kg/m3. Likewise, it shows an indirect tensile strength with its maximum value of 36.1kg/cm2 at 28 days, with the addition of 25kg/m3 of steel fibers, and an elastic modulus that increases with the addition of type steel fibers. Wirand FF3, which clearly shows the influence of their addition on the physical and mechanical properties of cement-sand concrete, manufactured in Iquitos, with which the general hypothesis is confirmed.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Científica del Perú. Facultad de Ciencias e Ingeniería
Grade or title: Ingeniero Civil
Juror: Ríos Vargas, Caleb; Arévalo Flores, Jefree Stefano
Register date: 30-May-2024



This item is licensed under a Creative Commons License Creative Commons