Look-up in Google Scholar
Title: Implementación del sistema de iluminación en oficinas con mamparas de vidrio, mediante un sistema domótico mixto
Advisor(s): Icochea Bao, Raúl Enrique
OCDE field: http://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 2023
Institution: Universidad Nacional de Ingeniería
Abstract: En la actualidad, muchas edificaciones existentes, tanto en el sector residencial como el corporativo, se están interviniendo para poder ser capaces de albergar sistemas de control, que permitan a sus ocupantes un mayor grado de confort, ahorro energético e interacción; control local y remoto, entre otros. Este concepto de poder controlar, automatizar, monitorear los sistemas de una vivienda se denomina domótica. Edificio automatizado es un término clásico utilizado para referirse a un edificio o vivienda que tiene algún tipo de automatismo. De forma que, ante una solicitud prevista, da una respuesta adecuada dentro de una gama acotada y ordenada al mecanismo correspondiente para que actúe en consecuencia. Incluye tres áreas: confort, ahorro energético y seguridad. Surge de la aplicación directa de la automatización, que comenzó en el siglo XIX, con el desarrollo industrial. De hecho, los primeros sistemas de control aplicados a edificios fueron los mismos autómatas que se aplicaban a la industria. (Romero, Vázquez, De Castro, 2011, p. 22) En los años 60 del siglo XX, para que a un edificio se le denominara moderno, debía disponer al menos de escaleras y puertas automatizadas, ascensores, climatización y sistemas de detección de fuego y de intrusos. En los años 90, los edificios inteligentes empiezan a ser más numerosos y pretenden integrar todos los sistemas en el mismo cerebro central. (Romero et al., 2011, p. 33) El presente Trabajo de Suficiencia Profesional, describe la implementación domótica en un piso de edificio que tuvo un cambio de uso. Éste fue concebido inicialmente como un área de trabajo colaborativo, abierto, sin tabiquería. Posteriormente se realizaron trabajos para crear ambientes mediante tabiques de vidrio, para ser usados como oficinas sectorizadas. Dada esta modificación del espacio, fue necesario realizar una reinstalación de la partida de instalaciones eléctricas de iluminación, instalación de dispositivos de control como mandos, actuadores entre otros. En el Capítulo I, se presentan los antecedentes, donde se hace una referencia de la rápida expansión demográfica global que se va experimentado en la segunda mitad del siglo XX, la adopción muy rápida de nuevas tecnologías que han evolucionado a la par de las necesidades de una mayor cercanía digital y cómo también se refleja en las viviendas y diversos espacios. En la realidad problemática, se manifiestan las diversas dificultades y retos encontrados cuando se presentan proyectos de implementación tecnológica de control de iluminación y múltiples dispositivos del convivir diario. En los objetivos se manifiesta la intención de difundir e ilustrar la experiencia obtenida al ser parte del equipo que formuló, proyectó, ejecutó un sistema domótico con unas características ciertamente peculiares, donde no era posible utilizar controles locales cableados. Estas soluciones pueden ser de gran ayuda en el sector de la ingeniería civil, sobre todo cuando se realizan intervenciones en edificaciones existentes para dotarles de sistemas de control no considerados originalmente en el proyecto original, pudiendo incluso gestionar un edificio, mediante el Sistema BMS (Building Management System), añadiendo los dispositivos o pasarelas adecuadas para tal propósito. En el Capítulo II, se describen el marco teórico y conceptual en los que se describen los principios, definiciones, topologías y tipos de sistemas que existen, las bondades y restricciones de los mismos. En el Capítulo III, se presenta la descripción, alcance e impacto del proyecto, su estado inicial, la propuesta técnica, planificación, aspectos técnicos, memoria descriptiva, componentes físicos de la instalación, metrado y presupuesto. El Capítulo IV, trata de la ejecución del proyecto, donde se describe el proceso constructivo, en el cual se presenta paso a paso las partidas desarrolladas en orden cronológicos hasta el proceso de configuración, pruebas y entrega del mismo. En el Capítulo V, se tiene la comparación del costo directo de las partidas más influyentes en el presupuesto, donde se realiza un breve análisis entre el supuesto que todo el proyecto hubiese sido con un sistema cableado de transmisión de datos, en comparación con un sistema inalámbrico por radiofrecuencia de la misma marca y proveedor; con la finalidad de poder contar con una referencia de cuánto es la diferencia porcentual de una tecnología con la otra y a incidencia en partidas de tabiquería para poder realizar el cableado e instalación de mandos en pared.

At present, many existing buildings, both in the residential and corporate sectors, are being intervened in order to be able to house control systems, which allow their occupants a greater degree of comfort, energy savings and interaction; local and remote control, among others. This concept of being able to control, automate, and monitor the systems of a home is called home automation. Automated building is a classic term used to refer to a building or house that has some type of automation. So that, when faced with a planned request, it gives an appropriate response within a limited and ordered range to the corresponding mechanism so that it can act accordingly. It includes three areas: comfort, energy saving and security. It arises from the direct application of automation, which began in the 19th century, with industrial development. In fact, the first control systems applied to buildings were the same automata that were applied to industry. (Romero, Vázquez, De Castro, 2011, p. 22) In the 1960s, for a building to be called modern, it had to have at least stairs and automated doors, elevators, air conditioning, and fire and intruder detection systems. In the 1990s, intelligent buildings began to be more numerous and they tried to integrate all the systems in the same central. (Romero et al., 2011, p. 33). This Professional Sufficiency Work describes the home automation implementation on a building floor that had a change of use. Which was initially conceived as a collaborative, open work floor, without partitions. Subsequently, work was carried out to create environments through glass partitions, to be used as sectorized offices. Given this modification of the space, it was necessary to carry out a reinstallation of the electrical lighting installations, installation of control devices such as controls, actuators, among others. In Chapter I, the background is presented, in which the guidelines of the evolution of the activities that the human being has been developing in closed environments are exposed, controlling the lighting of the premises manually and using conventional technology. In the problematic reality, the various difficulties and challenges encountered when technological implementation projects for lighting control and multiple devices of daily living are presented. The objectives show the intention of disseminating and illustrating the experience obtained by being part of the team that formulated, designed, and executed a home automation system with certain peculiar characteristics, where it was not possible to use wired local controls. These solutions can be of great help in the civil engineering sector, especially when interventions are carried out on existing buildings to provide them with control systems not originally considered in the original project, being able to even manage a building, through the BMS System (Building Management System), adding the appropriate devices or gateways for this purpose. In Chapter II, the theoretical and conceptual framework is described in which the principles, definitions, topologies and types of systems that exist, their benefits and restrictions are described. In Chapter III, the description, scope and impact of the project of which it was part throughout its process, its initial state, the technical proposal, planning, technical aspects, descriptive memory, physical components of the installation, metering and budget are presented. Chapter IV deals with the execution of the project, where the construction process is described, in which the items developed are presented step by step in chronological order until the configuration, testing and delivery process. In Chapter V, there is a comparison of the direct cost of the most influential items in the budget, where a brief analysis is made between the assumption that the entire project would have been with a wired data transmission system, in comparison with a system radiofrequency wireless of the same brand and supplier; this in order to have a reference of how much is the percentage difference of one technology with the other and incidence in partitioning items to be able to carry out the wiring and installation of controls in wall.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Nacional de Ingeniería. Facultad de Ingeniería Civil
Grade or title: Ingeniero Civil
Juror: Arrieta Freyre, Javier Eduardo; Cárdenas Saavedra, Fernando
Register date: 29-Feb-2024; 29-Feb-2024



This item is licensed under a Creative Commons License Creative Commons