Look-up in Google Scholar
Title: Diseño del sistema de drenaje de aguas de no contacto para la estabilidad del depósito de material excedente (DEM) en Mollepata región de La Libertad – Perú
Other Titles: DESIGN OF THE NON-CONTACT WATER DRAINAGE SYSTEM FOR THE STABILITY OF SURPLUS MATERIAL DEPOSIT (DEM) IN MOLLEPATA, LA LIBERTAD REGION - PERU
Advisor(s): Mogrovejo Gutiérrez, Rubén Esaú
OCDE field: https://purl.org/pe-repo/ocde/ford#2.00.00; https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 8-Jan-2024
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: En la actualidad, el manejo adecuado del sistema de drenaje de aguas de no contacto es de vital importancia para garantizar la estabilidad del depósito de material excedente (DEM). Surge la necesidad de determinar qué tipo de material proporcionará un mejor comportamiento en dicho sistema. El objetivo general fue determinar el tipo de material que mejor se comporta en el Sistema de Drenaje de Aguas de No Contacto para la estabilidad del depósito de material excedente (DEM). Los objetivos específicos incluyeron en el desarrollo del análisis hidrológico, dimensionamiento del sistema de drenaje con la capacidad de conducir los flujos de eventos extremos, determinar los factores de seguridad de los taludes y evaluar el desgaste de la geomembrana lisa de 1.0 mm y la lona de concreto de 6.0 mm. Para estos objetivos, se utilizaron métodos como el de Frederick-Bell y regresión múltiple para estimar los factores de seguridad. Se recopilaron datos de intensidad, duración y frecuencia de precipitaciones, así como datos de desgaste de los materiales de revestimiento. Obteniendo un caudal de diseño de Q total 0.152 m3/s. Además, los taludes evaluados mostraron factores de seguridad de 1.612 en el análisis estático y 1.126 en el análisis Pseudoestatico. En cuanto al desgaste de los materiales de revestimiento, se observó que la geomembrana lisa sufrió un volumen por desgaste perdido de 156,168 m3, mientras que la lona de concreto registró un volumen de 171,610 m3. En conclusión, este estudio proporciona información para la planificación y el diseño de infraestructuras hidráulicas, permitiendo considerar los factores como la intensidad de precipitaciones, la estabilidad de los taludes y el desgaste de los materiales de revestimiento.

Nowadays, the proper management of the non-contact water drainage system is vital to ensure the stability of the excess material deposit (DEM). The need arises to determine what material will perform better in said system. The general objective was to determine the material that best behaves in the Non-Contact Water Drainage System to stabilize the surplus material deposit (DEM). The specific objectives included developing the hydrological analysis, sizing the drainage system with the capacity to conduct the flows of extreme events, determining the safety factors of the slopes, and evaluating the wear of the 1.0 mm smooth geomembrane and the tarp of 6.0 mm concrete. For these objectives, methods such as Frederick-Bell and multiple regression were used to estimate safety factors. Rainfall intensity, duration, and frequency data were collected, as well as wear data on the lining materials, obtaining a design flow of total Q 0.152 m3/s. Furthermore, the slopes evaluated showed safety factors of 1.612 in the static analysis and 1.126 in the Pseudostatic analysis. Regarding the wear of the lining materials, it was observed that the smooth geomembrane suffered a lost wear volume of 156,168 m3, while the concrete canvas recorded a volume of 171,610 m3. In conclusion, this study provides information for the planning and designing of hydraulic infrastructures, allowing factors such as rainfall intensity, slope stability, and wear of lining materials to be considered.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). División de Estudios Profesionales para Ejecutivos (EPE)
Grade or title: Ingeniero Civil
Juror: Santos Hurtado, Sissi; Ramos Orlandino, Carmela; Jimenez Zambrano, Maryelvi
Register date: 9-Feb-2024; 9-Feb-2024



This item is licensed under a Creative Commons License Creative Commons