Look-up in Google Scholar
Title: Diseño de un embalse en el rio la cuesta mediante una presa de gravedad para el aprovechamiento hídrico en periodos estiaje, Distrito La Cuesta, Provincia de Otuzco, La Libertad 2020
Advisor(s): Cabanillas Quiroz, Guillermo Juan
OCDE field: http://purl.org/pe-repo/ocde/ford#2.01.00
Issue Date: 2023
Institution: Universidad Privada Antenor Orrego
Abstract: The main objective of this thesis is to elaborate the proposal of a reservoir by means of a gravity dam in the river "La Cuesta" for water use in periods of low water. The following research of applied type in a non-experimental design of descriptive type, for which use was made of data collected by national sources such as SENAMHI, FAO, Municipality of the district and through the use of software: ARCGIS, CIVIL 3D, AUTOCAD and with the Methods: GUMBEL METHOD; MASS CURVE METHOD; LOG PEARSON TYPE III METHOD; CHRISTIANSEN METHOD; MAXIMUM RATIONAL FLOW METHOD, AVH METHOD and finally BERNOULLI METHOD we found as a result that the maximum flood flow in the "La Cuesta" River is 50. 35 m3/s in a return period of 20 years, taking into account that the area destined to agriculture within the district of La Cuesta is 13. 56 hectares, the average flow for water use in crop irrigation is 5.16 m3/s corresponding to the year 2016, the volume of the reservoir is 0.71MMC in relation to the dead volume, 5.95 MMC in relation to the useful volume and 6.66MMC in relation to the total volume, reservoir area corresponds to a value 861,890 m2 i.e. 86. 18 hectares, maximum elevation is 1907 m.s.n.m. at operation level, spillway height is 1.40 m and an outlet of 0.60 m. diameter, crown length of 260.58 m, height of the dam located at the maximum point with a value of 35 m. which would result in an ideal proposal for a reservoir by means of a gravity dam.

La presente tesis tiene como objetivo principal elaborar la propuesta de un embalse por medio de una presa de gravedad en el rio “La Cuesta” para el aprovechamiento hídrico en periodos de estiaje. La siguiente investigación de tipo aplicada en un diseño no experimental de tipo descriptivo, para lo cual se hizo uso de datos recopilados por fuentes nacionales como lo es el SENAMHI, FAO, Municipalidad del distrito y por medio del uso de software: ARCGIS, CIVIL 3D, AUTOCAD y con los Métodos: MÉTODO DE GUMBEL; METODO CURVA MASA; METODO LOG PEARSON TIPO III; METODO DE CHRISTIANSEN; METODO DE CAUDAL MAXIMO RACIONAL, METODO AVH y finalmente el METODO BERNOULLI encontramos como resultado que el Caudal de máxima avenida en el Rio “La Cuesta” es de 50.35 m3/s en un periodo de retorno de 20 años, se toma en cuenta que el área destinada a la agricultura dentro del distrito La Cuesta es de 13.56 hectáreas, el Caudal promedio para el aprovechamiento hídrico en el riego de cultivos es de 5.16 m3/s que corresponde al año 2016, el volumen del embalse es de 0.71 MMC en relación con el volumen muerto, 5.95 MMC en relación con el volumen útil y 6.66 MMC en relación con el volumen total, área de embalse corresponde a un valor 861,890 m2 es decir 86.18 hectáreas, cota máxima es de 1907 m.s.n.m a nivel de operación, altura del vertedero es de 1.40 m y un desagüe de 0.60 m. de diámetro, longitud de la corona de 260.58 m, altura de la presa ubicada en el punto máximo con un valor de 35 m. lo que daría como resultado una propuesta ideal de un embalse por medio de una presa de gravedad.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada Antenor Orrego. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Sagastegui Plasencia, Fidel German; Serrano Hernandez, Jose Luis; Medina Carbajal, Lucio
Register date: 6-Sep-2023; 6-Sep-2023



This item is licensed under a Creative Commons License Creative Commons