Look-up in Google Scholar
Full metadata record
Galicia Guarniz, William Conrad
Esquivel Bocanegra, Walter Orlando
Mantilla Cueva, Daktner Marcelo
Esquivel Bocanegra, Walter Orlando
2023-02-02T19:39:44Z
2023-02-02T19:39:44Z
2023-02-02T19:39:44Z
2023-02-02T19:39:44Z
2023
https://hdl.handle.net/20.500.12759/10266
La presente tesis trata del análisis de las propiedades físico – mecánicas (análisis de las características del agregado, resistencia a la compresión y flexotracción) para un mortero f’c= 125 kg/cm2 , utilizando cemento QHUNA tipo I y aplicando vidrio en polvo al 4%, 8% y 12% para reforzar el mortero. La metodología empleada es cuantitativa, con un tipo de investigación aplicada y diseño de investigación básica, porque se va a recopilar información e investigar normas para realizar los ensayos y diseños, con el fin de obtener mejores resultados en la dosificación del diseño de mezcla para determinar el porcentaje de fluidez, resistencia a la compresión y flexotracción. En el procedimiento realizamos el análisis de las características del agregado fino mediante la Norma Técnica Peruana NTP 400.012, luego elaboramos el diseño de mezcla de concreto bajo los lineamientos de American Concrete Institute (ACI 211.4) empleando cemento QHUNA tipo I con adición vidrio en polvo al 4%, 8% y 12%. Con las muestras obtenidas (patrón, +4%, 8% y 12% de vidrio en polvo) se procederá a realizar el ensayo de mesa de flujo para determinar el porcentaje de fluidez según la Norma NTP 334.057; a continuación seleccionamos especímenes cúbicos de 5 cm por lado para el ensayo de resistencia a la compresión del mortero de acuerdo a las Normas NTP 334.051 y ASTM C – 109; y para determinar el ensayo de la resistencia a la flexotracción seleccionamos testigos prismáticos de 4 cm x 4 cm x 16 cm (4 cm de ancho, 4 cm de altura y 16 cm de largo) según las Normas UNE-EN_1015-11 y NTP 334.120. Por último, evaluamos los resultados mediante tablas y gráficos comparativos del valor a compresión y flexotracción (patrón, patrón + 4%, patrón + 6% y patrón + 8% de vidrio en polvo) ensayados a los 7, 14 y 28 días. (es_PE)
This thesis deals with the analysis of the physical-mechanical properties (analysis of the characteristics of the aggregate, resistance to compression and flexotraction) for a mortar f'c= 125 kg/cm2, using QHUNA type I cement and applying glass powder to the mortar. 4%, 8% and 12% to reinforce the mortar. The methodology used is quantitative, with a type of applied research and descriptive research design, because information will be collected and standards will be investigated to carry out the tests and designs, in order to obtain better results in the dosage of the mixture design to determine the percentage of fluidity, resistance to compression and flexotraction. In the procedure we carry out the analysis of the characteristics of the fine aggregate through the Peruvian Technical Standard NTP 400.012, then we elaborate the concrete mix design under the guidelines of the American Concrete Institute (ACI 211.4) using QHUNA type I cement with increased glass powder at 4%, 8% and 12%. With the samples obtained (pattern, +4%, 8% and 12% of glass powder) the flow table test will be carried out to determine the percentage of fluidity according to the NTP 334.057 Standard; then we select cubic specimens of 5 cm per side for the compressive strength test of the mortar according to the NTP 334.051 and ASTM C – 109 Standards; and to determine the flexotraction resistance test, we selected prismatic cores of 4 cm x 4 cm x 16 cm (4 cm wide, 4 cm high and 16 cm long) according to the UNE-EN_1015-11 and NTP 334.120 standards. . Finally, we evaluated the results through tables and comparative graphs of the compression and flexotraction value (standard, standard + 4%, standard + 6% and standard + 8% of glass powder) tested at 7, 14 and 28 days. (en_US)
Tesis (es_PE)
application/pdf (es_PE)
spa (es_PE)
Universidad Privada Antenor Orrego - UPAO (es_PE)
T_CIVIL_2204
info:eu-repo/semantics/closedAccess (es_PE)
https://creativecommons.org/licenses/by/4.0/ (es_PE)
Repositorio institucional - UPAO (es_PE)
Universidad Privada Antenor Orrego (es_PE)
Porcentaje de Fluidez (es_PE)
Resistencia a la Compresión (es_PE)
Aplicación de vidrio en polvo (4%, 8% Y 12%) en un mortero con cemento Qhuna Tipo I para el análisis de sus propiedades físico – mecánicas (es_PE)
info:eu-repo/semantics/bachelorThesis (es_PE)
Universidad Privada Antenor Orrego. Facultad de Ingeniería (es_PE)
Ingeniería Civil (es_PE)
Ingeniero Civil (es_PE)
PE (es_PE)
http://purl.org/pe-repo/ocde/ford#2.01.00
http://purl.org/pe-repo/renati/level#tituloProfesional
41420875
https://orcid.org/0000-0003-4506-9290 (es_PE)
70294626
72617657
732016 (es_PE)
Vargas López, Segundo
Medina Carbajal, Lucio Sigifredo
Henriquez Ulloa, Paul
http://purl.org/pe-repo/renati/type#tesis
Privada asociativa



This item is licensed under a Creative Commons License Creative Commons