Look-up in Google Scholar
Title: Influencia del aditivo plastificante SIKA en las propiedades del concreto liviano a base de poliestireno expandido
Advisor(s): Galicia Guarniz, William Conrad
OCDE field: http://purl.org/pe-repo/ocde/ford#2.01.00
Issue Date: 2022
Institution: Universidad Privada Antenor Orrego
Abstract: En el trabajo de investigación llamado “Influencia del aditivo plastificante Sika en las propiedades del concreto liviano a base de poliestireno expandido” tiene como objeto principal determinar la influencia del aditivo plastificante Sika en las propiedades del concreto liviano a base de poliestireno expandido. Para esto se realizó la dosificación de 30 proporciones de mezcla para concreto liviano a base de poliestireno expandido, con y sin aditivo plastificante Sika, a edades de 7 y 28 días; y considerando 3 probetas por proporción, para estimar un resultado más exacto; consiguiendo un total de 180 probetas a ensayar. Los ensayos a realizar serán de compresión y slump. El proceso para determinar la dosificación de los materiales fue mediante la norma ACI 523.3R, que nos presenta el proceso de obtención de las cantidades óptimas para concretos celulares por encima de 800 kg/m3, con densidades de hasta 1920 kg/m3. Así pues, como no se cuenta con una norma peruana para este tipo de concretos, se optó por esta norma. Siguiendo cada uno de los pasos se obtuvieron las proporciones deseadas, que en colaboración con el laboratorio de concreto GEOCYP S.R.L, se pudo determinar la resistencia a la compresión y el slump de las muestras estudiadas. Se obtuvo como principal resultado, que la adición del aditivo plastificante Sika junto con la reducción de agua en el concreto a base de poliestireno expandido de densidad de 1600 kg/cm2 permitió conseguir una resistencia 23% mayor a la resistencia del concreto sin aditivo ni reducción de agua.

The main objective of the research work called ""Influence of Sika plasticizer admixture on the properties of lightweight expanded polystyrene-based concrete"" is to determine the influence of Sika plasticizer admixture on the properties of lightweight expanded polystyrene-based concrete. For this, the dosage of 30 mixing proportions for lightweight concrete based on expanded polystyrene was carried out, with and without Sika plasticizer additive, at ages of 7 and 28 days; and considering 3 specimens per proportion, to estimate a more accurate result; achieving a total of 180 specimens to be tested. The tests to be carried out will be compression and slump. The process to determine the dosage of the materials was by means of the ACI 523.3R standard, which presents the process of obtaining the optimal quantities for cellular concretes above 800 kg / m3, with densities of up to 1920 kg / m3. Thus, as there is no Peruvian standard for this type of concrete, this standard was chosen. Following each of the steps, the desired proportions were obtained, which in collaboration with the concrete laboratory GEOCYP S.R.L, the compressive strength and slump of the samples could be determined. The main result was that the addition of the Sika plasticizer additive together with the reduction of water in the concrete based on expanded polystyrene with a density of 1600 kg / cm2 allowed to achieve a resistance 23% greater than the resistance of concrete without additive or reduction. of water.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada Antenor Orrego. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Pérrigo Sarmiento, 2054 Félix Gilberto; Vargas López, Segundo; Geldres Sánchez, Carmen Lucía
Register date: 16-Apr-2022; 16-Apr-2022



This item is licensed under a Creative Commons License Creative Commons