Look-up in Google Scholar
Full metadata record
Lujan Silva, Enrique Francisco (spa)
Chomba Quispe, Kriss Norka (spa)
Chomba Quispe, Kriss Norka (spa)
2023-01-25T21:50:28Z
2023-01-25T21:50:28Z
2023-01-25T21:50:28Z
2023-01-25T21:50:28Z
2023
https://hdl.handle.net/20.500.12759/10195
The research work was carried out on the alternate route Nueva Ciudad de Olmos detour km 32+000 in the district of Olmos, Province of Lambayeque, Department of Lambayeque, with the purpose of analyzing and comparatively evaluating the geometric and structural design between a flexible and rigid pavement. Therefore, the conditions of the pavement of the road under study were observed and analyzed. In the structural design of the flooring, was used the AASHTO 93 methodology. In addition, the recommendations of the National Building Regulations: Standard CE.010 Urban Pavement and the Highway Manual of the Ministry of Transportation and Communications were taken into account, which were used to establish the thicknesses and parameters for the design of flexible and rigid pavement. For data collection, preliminary studies were carried out, such as the traffic study, which showed that the number of equivalent axle repetitions for the flexible pavement is 3,166,435 and for the rigid pavement it is 4,177,916.54, fundamental data that allowed us to determine the structural design for both pavements. The results obtained for the structural design of the rigid pavement is a 20 cm concrete slab with a f'c = 280kg/cm2 and a 15 cm subbase, with a cost of S/ 9,924,046.49 and for the structural design of the flexible pavement is a 10 cm asphalt layer, 20 cm base and 15 cm subbase, with a cost of S/ 7,877,152.66. It was concluded that flexible pavement offers a lower cost than rigid pavement, which makes it more favorable from the economic point of view, but in the long term it will demand higher maintenance costs. (eng)
El trabajo de investigación se llevó a cabo en la ruta alterna Nueva Ciudad de Olmos desvío km 32+000 en el distrito de Olmos, Provincia de Lambayeque, Departamento Lambayeque, la cual tuvo como finalidad analizar y evaluar comparativamente el diseño geométrico y estructural entre un pavimento flexible y rígido. Por lo tanto, se observó y analizó las condiciones en la que se encontraba el pavimento de la carretera en estudio. Con respecto al diseño estructural se empleó las normas AASHTO-93. Además, se tomaron en cuenta las recomendaciones del Reglamento Nacional de Edificaciones: Norma CE.010 Pavimento Urbanos y del manual de carreteras del Ministerio de Transportes y Comunicaciones, las cuales sirvieron para establecer los espesores y parámetros para el diseño del pavimento flexible y rígido. Para la toma de datos se llevó a cabo estudios preliminares como el estudio de tráfico, en el cual se obtuvo que el número de repeticiones de ejes equivalentes para el pavimento flexible es 3’166,435 y para el pavimento rígido es 4’177,916.54, datos fundamentales que nos permitió determinar el diseño estructural para ambos pavimentos. Los resultados obtenidos en el diseño estructural del pavimento rígido es una losa de concreto de 20 cm con un f’c = 280kg/cm2 y una subbase de 15 cm, con un costo de S/ 9,924,046.49 y para el diseño estructural del pavimento flexible es una carpeta asfáltica de 10 cm, base de 20 cm y sub base de 15 cm, con un costo de S/ 7,877,152.66 Se concluyó que el pavimento flexible ofrece un costo menor al pavimento rígido, lo cual lo vuelve más favorable desde el aspecto económico, pero a largo plazo va a demandar un mayor costo de mantenimiento (spa)
Tesis (spa)
application/pdf (eng)
spa (spa)
Universidad Privada Antenor Orrego - UPAO (spa)
T_CIVIL_2194
info:eu-repo/semantics/openAccess (eng)
https://creativecommons.org/licenses/by/4.0/
Universidad Privada Antenor Orrego (spa)
Repositorio institucional - UPAO (spa)
Ciudad (spa)
Ruta (spa)
Diseño geométrico y estructural para el trazo de la ruta alterna nueva ciudad de Olmos desvío KM 32+000, Región Lambayeque (spa)
info:eu-repo/semantics/bachelorThesis (eng)
Universidad Privada Antenor Orrego. Facultad de Ingeniería (spa)
Ingeniería Civil (spa)
Ingeniero Civil (spa)
PE (spa)
http://purl.org/pe-repo/ocde/ford#2.01.00
http://purl.org/pe-repo/renati/level#tituloProfesional (spa)
18888927
https://orcid.org/0000-0001-8960-8810
70278435
732016
Rodriguez Ramos, Mamerto (spa)
Geldres Sanchez, Carmen (spa)
Henriquez Ulloa, Paul (spa)
http://purl.org/pe-repo/renati/type#tesis (spa)
Privada asociativa



This item is licensed under a Creative Commons License Creative Commons