Look-up in Google Scholar
Full metadata record
Linares Vértiz, Saul Noe
Barrantes Deza, Miguel
Lora Rosales, Jim
Barrantes Deza, Miguel
2019-05-06T14:14:15Z
2019-05-06T14:14:15Z
2019-05-06T14:14:15Z
2019-05-06T14:14:15Z
2019
https://hdl.handle.net/20.500.12759/4750
The present study aims at the detection and validation of shots or bullet in the process of punching of the oil wells. The field engineers at the moment of carrying out the punching process visualize it through an ammeter which is located in the shooting panel. It indicates when the shot was taken, but it can also react without the cannon having been detonated. With the development of the following design of the electronic circuit that will detect and validate the detonations by means of sensors, which will be able to capture the vibration caused by that detonation or shooting, in the same way it will be known with precision whether the detonation occurred or not in the process of punching the oil wells, so the engineer in charge of the operation will be completely sure that it was carried out successfully and it was not a false contact, without the need to wait to take out the tool from the well to check if shots were fired or not, which would save time, labor and materials. A well-reported shot will slow down the flow of hydrocarbons. (en_US)
El presente estudio cuyo propósito está orientado en la detección y validación de los disparos o baleo en el proceso de punzonamiento de los pozos petroleros. Los ingenieros de campo al momento de realizar el proceso de punzonamiento lo visualizan a través de un amperímetro el cual está ubicado en el shooting panel, éste les indica cuando se realizó el baleo, pero también puede reaccionar sin necesidad de que el cañón se haya detonado. Con la elaboración del siguiente diseño del Circuito Electrónico va a detectar y validar las detonaciones mediante unos sensores, los cuales van a poder captar la vibración ocasionada por dicha detonación o baleo, de igual modo se sabrá con precisión si se dio o no la detonación en el proceso de punzonamiento de los pozos petroleros, así el ingeniero a cargo de la operación estará completamente seguro de que se realizó con éxito y no fue un falso contacto, sin necesidad de esperar a sacar la herramienta del pozo para comprobar si se hicieron o no los disparos, lo que ahorraría con ello tiempo, trabajo y materiales. Un disparo bien reportado posibilitará el flujo de los hidrocarburos. (es_PE)
Tesis (es_PE)
application/pdf (es_PE)
spa (es_PE)
Universidad Privada Antenor Orrego - UPAO (es_PE)
T_ING.ELECT_843
info:eu-repo/semantics/closedAccess (es_PE)
https://creativecommons.org/licenses/by/4.0/
Universidad Privada Antenor Orrego (es_PE)
Repositorio Institucional - UPAO (es_PE)
Validación de disparos (es_PE)
Detección (es_PE)
Propuesta de diseño de un circuito electrónico para la detección y validación de los disparos con el shooting panel en Csed Hole en el proceso de punzonamiento de pozos petroleros por la empresa Geowell - Talara (es_PE)
info:eu-repo/semantics/bachelorThesis (es_PE)
Universidad Privada Antenor Orrego. Facultad de Ingeniería (es_PE)
Ingeniería Electrónica (es_PE)
Título Profesional (es_PE)
Ingeniero Electrónico (es_PE)
PE
http://purl.org/pe-repo/ocde/ford#2.11.00
Privada asociativa



This item is licensed under a Creative Commons License Creative Commons