Look-up in Google Scholar
Title: Mejoramiento de las propiedades físicas-mecánicas del ladrillo de adobe adicionando mucílago del overall, distrito San Juan de Bigote, departamento Piura
Advisor(s): Chávez Díaz, Luis Alberto Erick
OCDE field: http://purl.org/pe-repo/ocde/ford#2.01.00
Issue Date: 2024
Institution: Universidad Privada Antenor Orrego
Abstract: Esta tesis titulada Mejoramiento De Las Propiedades Mecánicas Del Ladrillo De Adobe Adicionando Mucílago Del Overall, Distrito San Juan De Bigote, Departamento Piura, cuyo objetivo principal es mejorar las propiedades mecánicas de los ladrillos de adobe adicionando Mucílago de overall, proponiendo la interrogante ¿Mejorará las propiedades mecánicas de ladrillos de adobe adicionando mucílago del overall? Esta tesis según su tipo es una Investigación Aplicada, conforme a su Diseño de Contrastación es Investigación No Experimental Transversal y su nivel como Investigación Descriptiva, asistiéndonos de técnicas de documentación de datos y observación directa, con instrumentos como fichas de ensayos, fotos y equipos automatizados; comenzando por la recolección material necesario para la elaboración de adobe al igual que la recolección del fruto de la Cordia Lutea para verificar que el material es apto para la elaboración de adobe de la Norma Técnica E.080 del RNE, se le aplicaron ensayos físicos para corroborar la presencia de arcilla y su plasticidad. Después se elaboró el adobe con las medidas de 0.08 m de altura 0.15 m de ancho y 0.30 m de largo y cubos con las medidas de 0.10 m por arista para los ensayos mecánicos normados por la Norma Técnica Peruana E.080:2017. En el ensayo de compresión en unidad que se le aplicó al cubo de 0.10 m por arista mostró que supera la resistencia adicionándole el 15% de Mucílago de overall dándonos 14 kgf/cm2 superando el requerimiento planteado en la norma E.080 y dándonos un 17% de mejora con los adobes sin Mucílago. El ensayo de compresión en murete que se le aplicó al adobe de 8*15*30cm mostró que supera la resistencia adicionándole el 15% de Mucílago de overall dándonos 11 kgf/cm2 superando el requerimiento planteado en la norma E.080 y dándonos un 57% de mejora con los adobes sin Mucílago. En el ensayo de succión que se le aplicó al adobe de 8*15*30cm mostró que supera la resistencia adicionándole el 15% de Mucílago de overall dándonos 13 g/min/cm2 y dándonos un 200% de mejora con los adobes sin Mucílago. Estos resultados se respaldan en la Docimasia de Hipótesis con una confianza del 95%. Finalizando que se logró los resultados esperados, recomendando aplicar Mucílago de overall en el adobe más por el tema de impermeabilización que supera los límites establecidos en la norma

This thesis entitled Improvement of the Mechanical Properties of Adobe Brick by Adding Overall Mucilage, San Juan De Bigote District, Piura Department, whose main objective is to improve the mechanical properties of adobe bricks by adding overall mucilage, proposing the question "Will it improve the mechanical properties of adobe bricks by adding overall mucilage? In this thesis identified according to its type as Applied Research, according to its Contrasting Design as Transversal Non-Experimental Research and according to its level as Descriptive Research, assisting us with data documentation techniques and direct observation, with instruments such as test sheets, photos and equipment. automated; beginning with the collection of material necessary for the elaboration of adobe as well as the collection of the Cordia Lutea fruit to verify that the material is suitable for the elaboration of adobe regulated in E.080; physical tests were applied to corroborate the presence of clay and its plasticity. Afterwards, the adobe was elaborated with the measures of 8 cm in height, 15 cm in width and 30 cm in length and cubes with the measures of 10 cm per edge for the mechanical tests regulated by the Peruvian technical standard E.080:2017. In the unit compression test applied to the cube of 10 cm per edge, it showed that it exceeds the resistance by adding 15% of overall mucilage, giving us 14 kgf/cm2, exceeding the requirement set forth in the E.080 standard and giving us a 17% improvement with adobes without mucilage. In the wall compression test applied to the 8*15*30cm adobe, it showed that it exceeded the resistance by adding 15% of overall mucilage, giving 11 kgf/cm2, exceeding the requirement of the E.080 standard and giving a 57% improvement over the adobes without mucilage. The suction test applied to the 8*15*30cm adobe showed that it exceeded the resistance by adding 15% of overall mucilage, giving us 13 g/min/cm2 and giving us a 200% improvement over the adobes without mucilage. These results are supported by the Docimasia with a confidence of 99%. Concluding that the expected results were achieved, suggesting the application of overall mucilage in the adobe due to the waterproofing issue that exceeds the limits established in the standard
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada Antenor Orrego. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Durand Orellana, Rocío del Pilar; Velásquez Diaz, Gilberto Anaximandro; Merino Martínez, Marcelo Edmundo
Register date: 8-Jan-2024; 8-Jan-2024



This item is licensed under a Creative Commons License Creative Commons