Look-up in Google Scholar
Title: Diseño de una vivienda de adobe adicionando goma de penca de tuna en el muro y láminas de caucho en el techo para reducir el desmoronamiento y filtración por lluvias a tamaño escala en el distrito de Íllimo en la provincia de Lambayeque del departamento de Lambayeque
Other Titles: Design of an adobe house with the addition of prickly pear rubber in the wall and rubber sheets in the roof to reduce crumbling and seepage due to rainfall at scale in the district of Íllimo in the province of Lambayeque in the department of Lambayeque
Advisor(s): Eyzaguirre Acosta, Carlos Augusto
OCDE field: https://purl.org/pe-repo/ocde/ford#2.00.00; https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 15-Nov-2023
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: This study evaluates the conditions offered by abobe houses exposed to rain in the district of Íllimo in the department of Lambayeque, shows the characteristics of housing designs in the study area and analyzes the materials for incorporation in the mix design according to standard E080. The main objective is to reduce the crumbling of the abobe wall and rain filtration in the roof. To achieve the functionality of this proposal, two activities must be carried out. First, four adobe mixtures should be designed in the wall with a dosage of 25%, 20% prickly pear gum, adobe according to the E080 standard and traditional adobe. Second, propose a better construction process, applying rubber sheets on the roofs as a coating to prevent water infiltration. Then, three types of adobe housing are made at scale size; a) Traditional adobe wall plus roofing without cladding, b) E080 adobe wall plus roofing according to the standard, and c) 25% adobe wall plus roofing with cladding. Once the corresponding tests had been carried out on the four types of adobe, the aim was to find the best waterproofing alternative in order to compare the functionality of the three types of houses with a roof covering methodology. The results show that the mixture with a 25% dosage has a lower moisture content than the rest of the adobe with a value of 15.7%, the 20% dosage has a moisture content of 18.9% and the traditional housing has a moisture content of 19.5%. Likewise, the results of compressive strength, flexural-traction and axial compression in the 4 types of adobe, comply with the minimum strength established in the E080 standard. Finally, it is concluded that the mix design with a dosage of 25% shows the best option for the design of an adobe house against the impact of water from rainfall and with an added value in the roof with a coating to prevent water infiltration in the adobe walls.

En este estudio se evalúa las condiciones que ofrece las viviendas de abobe expuestas a lluvia en el distrito de Íllimo del departamento de Lambayeque, se muestran las características de diseños de vivienda de la zona de estudio y se analiza los materiales para la incorporación en el diseño de mezcla según norma E080. El objetivo principal es reducir el desmoronamiento del muro de abobe y filtración por lluvias en el techo. Para lograr la funcionalidad de esta propuesta se debe realizar dos actividades. Primero, en el muro se debe diseñar cuatro mezclas de adobe con una dosificación de 25%, 20% de goma de penca de tuna, adobe según norma E080 y el adobe tradicional. Segundo, proponer un mejor proceso constructivo, aplicando láminas de caucho en los techos como revestimiento para evitar la filtración de agua. Luego, se realiza 3 tipos vivienda de adobe a tamaño escala; a) Muro de adobe tradicional más techado sin revestimiento, b) Muro de adobe E080 más techado según norma y c) Muro de adobe de 25% más techado con revestimiento. Una vez realizado los ensayos correspondientes en los cuatro tipos de adobe se busca encontrar la mejor alternativa de impermeabilidad para luego comparar la funcionalidad en los tres tipos de vivienda con metodología de revestimiento en los techos. Los resultados muestran que la mezcla con dosificación de 25% tiene un contenido de humedad menor al resto de adobe con un valor 15.7%, dosificación de 20% tiene un contenido de 18.9% y la vivienda tradicional de 19.5% de humedad. Asimismo, los resultados de resistencia a comprensión, flexión-tracción y comprensión axial en los 4 tipos de adobe, cumplen con la resistencia mínima establecida en la norma E080. Finalmente, se concluye que el diseño de mezcla con dosificación de 25% muestra la mejor opción para el diseño de una vivienda de adobe frente al impacto del agua por lluvias y con un valor agregado en el techado con revestimiento para evitar filtración de agua en los muros de adobe.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Peña Torres, Pablo Jhoel; Rodriguez Barboza, Jose Ulises
Register date: 12-Jan-2024; 12-Jan-2024



This item is licensed under a Creative Commons License Creative Commons