Look-up in Google Scholar
Title: Estudio Geomecánico de la Veta Andaychagua para su recuperación por medio de Taladros Largos en positivo mediante modelamiento numérico 2D en la unidad minera Andaychagua
Advisor(s): Pehovaz Alvarez, Humberto Iván
OCDE field: https://purl.org/pe-repo/ocde/ford#2.00.00; https://purl.org/pe-repo/ocde/ford#2.07.05
Issue Date: 10-Nov-2023
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: El trabajo de suficiencia profesional tiene como título: Estudio Geomecánico de la Veta Andaychagua para su recuperación por medio de Taladros Largos en positivo mediante modelamiento numérico 2D en la unidad minera Andaychagua. Mediante la evaluación geomecánica se busca evaluar la viabilidad de recuperar mineral de alta ley localizado en la pared este de la veta Andaychagua del NV-1000. Se debe considerar la recuperación de parte de una veta que se ubica colindante con la veta antigua explotada por método Under Cut and Fill (Corte y Relleno Descendente). De acuerdo con la evaluación geomecánica, se establece la recuperación de la veta mediante taladros largos en positivo, construyendo un solo nivel inferior de perforación, voladura y extracción de mineral similar a la apertura de un corte en el método Taladros Largos. Para ello se realizó el Estudio Geomecánico de la veta Andaychagua, en donde se utilizó información de logueo, mapeo geomecánico y ensayos de laboratorio para definir las propiedades de resistencia del macizo rocoso y establecer las unidades geotécnicas. El estudio también incluyó análisis para definir los parámetros de diseño del método de minado y el sistema de soporte requerido. Con esta información, se construyó un modelo numérico en dos dimensiones para recrear las condiciones de esfuerzo-deformación que se presentarán durante la etapa de explotación. El objetivo principal fue definir el método de explotación óptimo que asegure la estabilidad de las labores y tajeos, la máxima recuperación y menor dilución posible.

The title of the professional proficiency work is: Geomechanical Study of the Andaychagua Vein for its recovery through positive Long Drills through 2D numerical modeling in the Andaychagua mining unit. Through the geomechanical evaluation, the feasibility of recovering high-grade mineral located in the eastern wall of the Andaychagua vein of NV-1000 is sought to be evaluated. Consideration should be given to recovering part of a vein that is located adjacent to the old vein exploited by the Under Cut and Fill method. According to the geomechanical evaluation, the recovery of the vein is established using long positive drills, constructing a single lower level of drilling, blasting and mineral extraction similar to the opening of a cut in the Long Hole method. For this purpose, the Geomechanical Study of the Andaychagua vein was carried out, where logging information, geomechanical mapping and laboratory tests were used to define the resistance properties of the rock mass and establish the geotechnical units. The study also included analysis to define the design parameters of the mining method and the required support system. With this information, a two-dimensional numerical model was built to recreate the stress-strain conditions that will occur during the exploitation stage. The main objective was to define the optimal exploitation method that ensures the stability of the work and pits, the maximum recovery and the least possible dilution.
Discipline: Ingeniería Minera
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ingeniería
Grade or title: Ingeniero de Gestión Minera
Juror: Jara Céspedes, Juan; Hinostroza Ríos, William Elio
Register date: 7-Jan-2024; 7-Jan-2024



This item is licensed under a Creative Commons License Creative Commons