Look-up in Google Scholar
Full metadata record
Peña Torres, Pablo Jhoel
Yaranga Taipe, Nestor Enrique (es_PE)
Taipe Cachuan, Marilyn Janeth (es_PE)
2023-12-29T04:28:44Z
2023-12-29T04:28:44Z
2023-12-29T04:28:44Z
2023-12-29T04:28:44Z
2023-11-10
000000012196144X (isni)
http://hdl.handle.net/10757/670328
Actualmente, la pobreza y la escasez son una de las problemáticas sociales que no tienen una solución clara para mitigar o revertir estos hechos. En el Perú, siendo un país latinoamericano con los niveles de incidencia de pobreza más altos a nivel mundial y en conjunto con los climas extremos que se viven en la sierra peruana ocasionan muchas pérdidas humanas y materiales anualmente. Una de las posibles soluciones para mitigar esta problemática es la mejora de la calidad de vida para las personas de bajos recursos que viven en climas extremos, específicamente en el distrito de Acoria, provincia de Huancavelica. La presente investigación tiene como objetivo aumentar el confort térmico, propiedades mecánicas y físicas en los bloques de adobe, material tradicional de construcción en zonas altoandinas, mediante adiciones naturales. Para este proyecto se usarán adiciones de paja y lana de oveja, se tomará como validación los requisitos dictados en las normas ASTM 5334-14, IEEE 442-1981 y la E.080 mediante los ensayos de conductividad térmica, ensayos de absorción, alabeo y compresión con el objetivo de evaluar la variación en cuanto a confort y resistencia con los adobes convencionales. Se realizaron ensayos con 5 diseños de mezcla, adobe tradicional, adobe con 2% de ichu, adobe con 2% de ichu y 0.5% de lana de oveja, adobe con 2% de ichu y 1% de lana de oveja, adobe con 2% de ichu y 2% de lana de oveja. Luego, con ayuda del software Ecotect se modela una vivienda con dimensiones y propiedades semejantes a las que se ve en la zona de caso de estudio, Acoria. Siguiendo con el proceso se añaden los parámetros obtenidos en los ensayos de laboratorio a los muros de la vivienda y se procede a hacer la simulación con temperaturas semejantes a la zona. Finalmente, se determinó que el mejor resultado es el adobe con 2% de ichu y 2% de lana de oveja, beneficiando al confort térmico.
Currently, poverty and scarcity are one of the social problems that do not have a clear solution to mitigate or reverse these events. In Peru, being a Latin American country with the highest levels of poverty incidence worldwide and together with the extreme climates experienced in the Peruvian mountains, they cause many human and material losses annually. One of the possible solutions to mitigate this problem is to improve the quality of life for low-income people who live in extreme climates, specifically in the district of Acoria, province of Huancavelica. The objective of this research is to increase thermal comfort, mechanical and physical properties in adobe blocks, a traditional construction material in high Andean areas, through natural additions. For this project, additions of straw and sheep wool will be used, the requirements dictated in the ASTM 5334-14, IEEE 442-1981, and E.080 standards will be taken as validation through thermal conductivity tests, absorption tests, warping and compression with the objective of evaluating the variation in comfort and resistance with conventional adobes. Tests were carried out with 5 mix designs, traditional adobe, adobe with 2% ichu, adobe with 2% ichu and 0.5% sheep wool, adobe with 2% ichu and 1% sheep wool, adobe with 2 % ichu and 2% sheep wool. Then, with the help of the Ecotect software, a house is modelled with dimensions and properties like those seen in the case study area, Acoria. Continuing with the process, the parameters obtained in the laboratory tests are added to the walls of the house and the simulation is carried out with temperatures like the area. Finally, it was determined that the best result is adobe with 2% ichu and 2% sheep wool, benefiting thermal comfort.
Trabajo de Suficiencia Profesional (es_PE)
application/pdf (en_US)
application/msword (en_US)
application/epub (en_US)
spa (es_PE)
Universidad Peruana de Ciencias Aplicadas (UPC) (es_PE)
info:eu-repo/semantics/openAccess (es_PE)
Attribution-NonCommercial-ShareAlike 4.0 International (*)
http://creativecommons.org/licenses/by-nc-sa/4.0/ (*)
Universidad Peruana de Ciencias Aplicadas (UPC) (es_PE)
Repositorio Académico - UPC (es_PE)
Adobe
Confort térmico
Conductividad térmica
Lana de oveja
Adobe
Ichu
Thermal comfort
Thermal conductivity
Sheep wool
Propuesta de elaboración de adobe incorporando ichu y lana de oveja para mejorar el confort térmico y las propiedades físico-mecánicas ante las heladas en Acoria - Huancavelica (es_PE)
Proposal to produce adobe incorporating ichu and sheep wool to improve thermal comfort and physical-mechanical properties in the face of frost in Acoria – Huancavelica
Trabajo de Suficiencia Profesional (other)
info:eu-repo/semantics/bachelorThesis (es_PE)
Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ingeniería (es_PE)
Ingeniería Civil (es_PE)
Licenciatura (es_PE)
Ingeniero Civil (es_PE)
PE (es_PE)
https://purl.org/pe-repo/ocde/ford#2.01.01
https://purl.org/pe-repo/ocde/ford#2.00.00 (es_PE)
https://purl.org/pe-repo/renati/level#tituloProfesional (es_PE)
42962782
0000-0002-6792-0245 (es_PE)
75541896
72883742
732016 (es_PE)
López Pasapera, Karla Lisette
Huerta Campos, Carlos Alberto
https://purl.org/pe-repo/renati/type#trabajoDeSuficienciaProfesional (es_PE)
Privada societaria



This item is licensed under a Creative Commons License Creative Commons