Look-up in Google Scholar
Title: Análisis numérico 3D del comportamiento carga-deformación de pilotes de la construcción del Hospital Germán Guzmán Gonzáles en la cuidad de Oxapampa- Departamento Cerro de Pasco
Other Titles: 3D numerical analysis of the load-deformation behavior of pilots of the construction of the Germán Guzmán Gonzáles Hospital in the city of Oxapampa - Cerro de Pasco Department
Advisor(s): ARONES VILLAVICENCIO, ALVARO PAULO
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.00; https://purl.org/pe-repo/ocde/ford#2.00.00
Issue Date: 12-Nov-2023
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: En el Perú, se han realizado 467 778 construcciones durante el año 2021 (INEI,2021) de las cuales las distintas obras civiles requieren el empleo de pilotes y cimentaciones profundas. Por ello, en la presente investigación se realizó el análisis comparativo de la capacidad de carga mediante métodos tradicionales y métodos numéricos de pilotes. Según el método de Décourt & Quaresma y Aoki – Velloso y el modelado en el programa Flac de la construcción del hospital German Guzmán, Oxapampa. Estos métodos están en función del número de golpes obtenidos en el ensayo SPT y de parámetros en relaciones a las características geotécnicas (clasificación del suelo, humedad, límite plástico que presenta la zona de estudio. Existen diversas metodologías de cálculo de capacidad de carga y análisis de los métodos numéricos y tradicionales en pilotes, empleando factores y coeficientes que se obtienen a partir de la teoría de cada método. Con respecto al procedimiento realizado para cumplir los objetivos propuestos, iniciará con el cálculo de los métodos tradicionales de tal manera que cumpla con los parámetros, diámetros establecidos(0.30,0.40,0.60,0.80 metros) y longitud de 10metros; en consecuencia, se procederá a determinar el tipo de pilote según su material y proceso constructivo en el programa Flac empleando las características para realizar el predimensionamiento del pilote, y la comparación de los resultados de los métodos. Finalmente se concluye que de acuerdo con los diámetros seleccionados y los resultados obtenidos mediante los cálculos y el programa Flac trabajar con el pilote de 0.40 m y de longitud de 10 metros ya que cumple con todos los parámetros y de acuerdo con la Norma E0.50 es de mayor seguridad en una construcción. Cuando se diseña un pilote es recomendable evaluar su capacidad de carga con mínimo 3 métodos, para así elegir el valor más conservador y ser más exactos.

In Peru, 467,778 constructions have been carried out during 2021 (INEI,2021), of which the different civil works require the use of piles and deep foundations. Therefore, in the present investigation, the comparative analysis of the load capacity was carried out using traditional methods and numerical methods of piles. According to the method of Décourt & Quaresma and Aoki – Velloso and modeling in the Flac program of the construction of the German Guzmán hospital, Oxapampa. These methods are a function of the number of blows obtained in the SPT test and parameters in relation to the geotechnical characteristics (soil classification, humidity, plastic limit presented by the study area. There are various methodologies for calculating load capacity and analyzing numerical and traditional methods in piles, using factors and coefficients that are obtained from the theory of each method. Regarding the procedure carried out to meet the proposed objectives, it will begin with the calculation of traditional methods in such a way that it meets the parameters, established diameters (0.30, 0.40, 0.60, 0.80 meters) and length of 10 meters; Consequently, the type of pile will be determined according to its material and construction process in the Flac program using the characteristics to carry out the pre-sizing of the pile, and the comparison of the results of the methods. Finally, it is concluded that according to the selected diameters and the results obtained through the calculations and the Flac program, working with the pile of 0.40 m and a length of 10 meters since it meets all the parameters and according to Standard E0.50 is of greater security in a construction. When designing a pile it is advisable to evaluate its load capacity with at least 3 methods, in order to choose the most conservative value and be more exact.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Soto Dueñas, Milagros Del Pilar; Herrera Lopez, Rossana
Register date: 27-Dec-2023; 27-Dec-2023



This item is licensed under a Creative Commons License Creative Commons