Look-up in Google Scholar
Title: Determinación del tiempo de vida útil de una faja transportadora minera previa a su instalación mediante algoritmo cuantitativo
Advisor(s): Ganoza Piña, José Javier
OCDE field: http://purl.org/pe-repo/ocde/ford#2.03.01
Issue Date: 2022
Institution: Universidad Nacional de Ingeniería
Abstract: Calculating the wear of a belt installed in a concentrator plant and that is running is simple with the help of NDT technology (non-destructive testing), it is only a matter of measuring the thickness of the load cover with ultrasound equipment on more than two occasions and the useful life of the belt can be projected. The problem arises when a belt that has not yet been installed, that is, the belt does not run yet, it is necessary to know how long the belt could last to estimate the inventory stock levels. The studies related to the belts are, for the most part, analyzes referring to the design criteria of the belt and its subsystems, but there are no studies referring to the wear of the belt. If we look for the theories of wear and tear, the approaches are complex due to the generality with which wear is addressed and the constants that depend a lot on non-continuous variables. In the Cerro Verde mining company, this need arose during the construction of the CV2 plant, it was required to know how long the strips of this new plant could last. To estimate the useful life of these strips, a statistical model was developed based on multiple linear regression with data from strips of the CV1 plant that served to determine the wear of the new CV2 plant. The studied algorithm could only be applied to the conveyor belts and not to the feeder feeders due to the discontinuity in its independent variables. Finally, the inventory stock level of belts was calculated using the algorithm developed for belts, which represents 93% of investment and for the Feeders, 50% of the belt of the total meters installed was considered.

Calcular el desgaste de una faja instalada en una planta concentradora y que está corriendo es sencillo con la ayuda de la tecnología NDT (ensayos no destructivos), solo es cuestión de medir con equipo ultrasonido el espesor de la cubierta de carga en más de dos oportunidades y se podrá proyectar la vida útil de la faja. El problema se presenta cuando una faja que aún no ha sido instalada, es decir que aún no corre la faja, se necesita saber cuánto podría durar la correa para estimar los niveles de stock de inventario. Los estudios relacionados a las correas son, en su mayoría, análisis referidos a los criterios de diseño de la faja y sus subsistemas, mas no existe estudios referidos al desgaste de la correa. Si buscamos por las teorías del desgaste los enfoques son complejos por la generalidad con que se aborda el desgaste y las constantes que dependen mucho de variables no continuas. En sociedad minera Cerro Verde se presentó esta necesidad durante la construcción de la planta CV2, se requería saber cuánto podrían durar las fajas de esta nueva planta. Para estimar la vida útil de estas fajas se desarrolló un modelo estadístico basado en la regresión lineal múltiple con datos de fajas de la planta CV1 que sirvieron para determinar los desgastes de la nueva planta CV2. El algoritmo estudiado sólo pudo aplicarse a las fajas transportadoras y no a los alimentadores feeders por presentar discontinuidad en sus variables independientes. Finalmente, el nivel de stock de inventario de fajas fue calculado usando el algoritmo desarrollado para fajas, el cual representa el 93% de inversión y para los Feeders se consideró un 50% de correa del total de metros instalados.
Discipline: Ingeniería Mecánica
Grade or title grantor: Universidad Nacional de Ingeniería. Facultad de Ingeniería Mecánica
Grade or title: Ingeniero Mecánico
Juror: Obregón Ramos, Máximo; Vera Ermitaño, Jorge
Register date: 8-Aug-2023; 8-Aug-2023



This item is licensed under a Creative Commons License Creative Commons