Look-up in Google Scholar
Title: Diseño de un sistema automatizado de riego tecnificado en las Lomas de Villa María controlado remotamente usando IOT
Advisor(s): Sotelo Valer, Freedy
OCDE field: http://purl.org/pe-repo/ocde/ford#2.03.02
Issue Date: 2021
Institution: Universidad Nacional de Ingeniería
Abstract: The present thesis project was carried out with the purpose of proposing an automatic system in Lomas de Paraíso, which will allow the automatic and manual watering of Tara plantations throughout its vegetative process, since this plant is very important because it can be used as a tanning, medicinal, dyeing, pesticide, in the pharmaceutical industry, beer and wine industry, food industry, etc. The irrigation land is divided in 2 zones which make a total of 7,101 m2 approximately This technified irrigation system can be operated both locally with a panel that has a human-machine interaction interface, and remotely through a mobile application that also has the ability to monitor water flow that is stored in a database. On the other hand, the system also has a tank filling controller that has the function of distributing the water provided in 2 ways according to the time of year: when there is fog, the so-called fog traps located at the top are used, these provide water which by gravity is distributed in the reservoirs located below; when there is no fog, a tanker truck will be the water supplier to a tank at the bottom and in order to take the water to the tanks located above, an electric power system is needed. The main function of the electric power system is to supply energy to the electric valves and electric pumps in a safe manner so that they can pump the water that has been supplied by the tanker truck, to the other tanks. Another function is to energize the irrigation and tank filling controllers with protective equipment to prevent them from failing. This automatic system will allow the increase of Tara production in the Lomas de Paraiso, as well as an efficient distribution and use of water resources. In addition, this system is scalable, allowing to increase irrigation areas and to be replicated in other places due to its low cost and easy operation.

El presente proyecto de tesis se realizó con la finalidad de proponer un sistema automático en Lomas de Paraíso, el cual permitirá que se pueda regar de forma automática y manual las plantaciones de Tara en todo su proceso vegetativo, ya que esta planta es muy importante debido a que puede ser usada como curtiente, medicinal, para tinte, plaguicida, en la industria farmacéutica, industria cervecera y vinos, industria alimentaria, etc. El terreno de riego está dividido en 2 zonas las cuales hacen un total de 7,101 m2 aproximadamente Este sistema de riego tecnificado podrá ser operado tanto de forma local con un panel que posee una interfaz de interacción humano-máquina, como ser operado de forma remota a través de una aplicación móvil que además tiene la capacidad de monitorear flujo de agua que es almacenada a una base de datos. Por otro lado el sistema también cuenta con un controlador de llenado de tanques que cumple la función de distribuir el agua proporcionada de 2 maneras que van de acuerdo a épocas del año: cuando hay neblina se usan los llamados atrapanieblas ubicados en la parte superior, estos proporcionan agua el cual por gravedad se distribuye en los reservorios que se ubican más abajo; cuando no hay neblina un camión cisterna será el proveedor de agua a un tanque en la parte baja y para poder llevar el agua a los tanques ubicados más arriba es necesario un sistema eléctrico de potencia. La función principal del sistema eléctrico de potencia es la de suministrar energía a las electroválvulas y electrobombas de forma segura para que puedan bombear el agua que ha sido suministrada por el camión cisterna, hacia los demás tanques. Otra de las funciones es la de energizar a los controladores de riego y llenado de tanques con equipos de protección para evitar que estos fallen. Este sistema automático permitirá el incremento de la producción de Tara en las Lomas de Paraíso, así como una eficiente distribución y uso de los recursos hídricos, además que este sistema es escalable permitiendo aumentar zonas de riego y poder ser replicado en otros lugares por su bajo costo y fácil operación.
Discipline: Ingeniería Mecatrónica
Grade or title grantor: Universidad Nacional de Ingeniería. Facultad de Ingeniería Mecánica
Grade or title: Ingeniero Mecatrónico
Juror: Munares Tapia, Carlos César; Castañeda De la Rosa, Ricardo Antonio
Register date: 20-Apr-2022; 20-Apr-2022



This item is licensed under a Creative Commons License Creative Commons