Look-up in Google Scholar
Title: Diseño de un modelo utilizando la herramienta SMED para reducir el tiempo de preparación de máquina en la línea de producción de ampollas en una empresa de productos de vidrio
Advisor(s): Lau Carrillo, Carmen Ivonne
Issue Date: 2019
Institution: Universidad Nacional de Ingeniería
Abstract: The current thesis has the aim to do the design of a model using the SMED tool to reduce the time of preparation in the line of ampoules production in the company, also this reduction of time will improve the productive capacity of the lines of ampoules. According to the diagnosis of the company, the main problem of the thesis is determined, then it’s describe the objective and the hypothesis. The design model has three stages: election of format change, use of tools (SMED, checklist, preventive maintenance, poka yoke and visual control) and sustainability of the model. Realizing the application of the model designed it can prove the reduction of time in the step of preparation before a change of format in the production ampoules line. Finally, for the format change process in investigation, the relation benefit and cost its determined resulting that by each S/. 0.10 invested, the company receive S/.7.9 in sales earnings, resulting this proposal viable

La presente tesis tiene por objetivo realizar el diseño de un modelo utilizando la herramienta SMED para reducir el tiempo de preparación en la línea de producción de ampollas en la empresa, además dicha reducción de tiempo permitirá mejorar la capacidad productiva de las líneas ampolleteras. De acuerdo con el diagnóstico de la empresa analizado, se determina el problema que es objeto de estudio en la presente tesis, luego se procede a describir el objetivo e hipótesis. El diseño del modelo planteado consta de tres fases: Elección de cambio de formato, Uso de herramientas (SMED, checklist, mantenimiento preventivo, Poka-Yoke y control visual) y Sostenibilidad del modelo. Al realizar la aplicación del modelo diseñado se comprueba la reducción del tiempo de preparación ante un cambio de formato en una línea de producción de ampollas. Por último, para el cambio de formato en estudio, se analiza la relación Beneficio Costo resultando que por cada S/.1.0 invertido se percibe S/. 7.90 de retorno en ventas, resultando viable la propuesta presentada.
Discipline: Ingeniería Industrial
Grade or title grantor: Universidad Nacional de Ingeniería. Facultad de Ingeniería Industrial y de Sistemas
Grade or title: Ingeniero Industrial
Register date: 25-Feb-2020; 25-Feb-2020



This item is licensed under a Creative Commons License Creative Commons