Look-up in Google Scholar
Title: Uniones empernadas de madera cumala con pernos de 1/4
Advisor(s): Moromi Nakata, Isabel
Issue Date: 2018
Institution: Universidad Nacional de Ingeniería
Abstract: The evaluations and analysis of structural joints with wood whose density is less than 0.40 gr / cm3 is given in an amount lower than what is considered necessary and taking into account that Perú has great potential in timber resources whose participation in the economy does not reach 1%. That is why we carry out the present study: "Cumala bolted wooden joints with 1/4" bolts. For this report we made use of wooden slats, which is representative of the species called Cumala, which were connected with one and two bolts. They have a theoretical density of 0.38 gr / cm3 and are not within the existing groups according to the classification of the woods with respect to their basic densities of the Manual of the Andean Group. Double shear tests were carried out, where the results obtained tell us that the allowable loads of the Cumala wood specimens are lower than the loads given by the E.010 norm, which demands that the Cumala wood should belong to a group, still not present in the E.010 standard. It is estimated that the results will serve as a basis for future evaluations considering the classification rules of the Andean Group, the amount of natural characteristics and the manufacturing defects that affect the resistance and behavior corresponding to each class and species, since each class has properties and values assigned design It is also expected the development of more research in order to obtain data with better precision, using different types of wood, in order to introduce them to the different productive sectors, and thus contribute to promote a greater productive economic and social activity

Las evaluaciones y análisis de las uniones estructurales con maderas cuya densidad son menores a 0.40 gr/cm3 se da en una cantidad inferior a lo que se considera necesario y teniendo en cuenta que el Perú tiene un gran potencial en recursos madereros cuya participación en la economía no alcanza el 1%. Es por ello que realizamos el presente estudio: “Uniones empernadas de madera Cumala con pernos de 1/4”. Para este informe hicimos uso de listones de madera, el cual es representativo de la especie denominada Cumala, que fueron conectadas con uno dos y tres pernos. Tienen una densidad teórica de 0.38 gr/cm3 y no están dentro de los grupos existentes según la clasificación de las maderas en lo que respecta a sus densidades básicas del Manual del Grupo Andino. Se realizaron ensayos de cizallamiento doble, donde los resultados obtenidos nos dicen que las cargas admisibles de los especímenes de madera Cumala son inferiores a las cargas dadas por la norma E.010, lo cual exige que la madera Cumala debiera pertenecer a un grupo, aún no presente en la norma E.010. Se estima que los resultaros servirá como base para próximas evaluaciones considerando las reglas de clasificación del Grupo Andino, la cantidad de características naturales y los defectos de manufactura que afectan la resistencia y comportamiento correspondiente a cada clase y especie, pues cada clase tiene propiedades y valores de diseño asignados. Se espera también el desarrollo de mayores investigaciones con el fin de obtener datos con mejor precisión, usando diversos tipos de maderas, con el fin de introducirlas a los diferentes sectores productivos, y así contribuir a fomentar una mayor actividad productiva económica y social.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Nacional de Ingeniería. Facultad de Ingeniería Civil
Grade or title: Ingeniero Civil
Register date: 12-Jun-2019; 12-Jun-2019



This item is licensed under a Creative Commons License Creative Commons