Look-up in Google Scholar
Title: Determinación del ratio de seguridad en un recinto interior mediante el incremento de la potencia térmica en viviendas que utilicen Gas Natural y/o GLP en la ciudad de Lima-Perú
Advisor(s): Mayorga Alba, Eleodoro Octavio
Issue Date: 2014
Institution: Universidad Nacional de Ingeniería
Abstract: The use of natural gas is an alternative energy source increasingly important against other fuels such as: the GLP, gasoline, diesel, coal and other energy. It is required to develop the culture of natural gas, which will make it possible to the growing use of this resource through the efficient use of its technical, economic and environmental advantages. To produce natural gas in Camisea (Cusco) Wells, it is necessary to have a system of transportation (TGP) and a network of distribution (company CÁLIDDA) to supply the consumption of the city of Lima - PERÙ. In the case of domestic residential and commercial installations apply the following Techniques Peruvian Standards: NTP 111.011-2008 "Piping system for domestic residential and commercial facilities"; NTP 111.022-2008 "Ventilation and Air for combustion in internal enclosures where they are installed for residential and commercial use gas artifacts" and the NTP 111.023-2008 "Evacuation of the products of combustion generated by natural gas artifacts" and the national regulation of buildings-2009 (EM-040).1 In the standard NTP111.022-2008, there are two important concepts, which are: ventilation Ratio, which is the volume of air (m3) thermal power (Kw) installed in the indoor enclosure where they were installed between the artifacts to natural gas or LPG and the Confined Space, which is the indoor enclosure volume is less than 4.8 m3/kw (50pie3/1000 BTU) of aggregate or joint rating of all the installed gas appliances. In obtaining the power are not considered artifacts type C". In the first part of the thesis project will be presented, the theoretical part and calculations performed with the space bordered on the NTP 111 022-2008. The second part tests will be carried out in the laboratory and results will be to obtain the Ratio of ventilation indoors, in the laboratory of engineering of oil and natural Gas - UNI, which is the aim of the thesis.

El uso del gas natural es cada vez más importante como una alternativa energética, en relación a otros combustibles: el G.L.P, la gasolina, el diesel, el carbón y otros. En este contexto, se requiere desarrollar la cultura del gas natural, que hará posible el empleo creciente de este recurso permitiendo el eficiente aprovechamiento de sus ventajas técnicas, económicas y ambientales. Para producir gas natural en los pozos de Camisea (Cusco), es necesario contar con un sistema de transporte (TGP) y una red de distribución (empresa CALIDDA) para abastecer el consumo de la ciudad de Lima-PERÚ. Para el caso de las instalaciones internas residenciales y comerciales se aplican las siguientes Normas Técnicas Peruanas: NTP 111.011-2008 “Sistema de tuberías para instalaciones internas residenciales y comerciales”; NTP 111.022-2008 “Ventilación y Aire para combustión en recintos internos donde se instalan artefactos a gas para uso residencial y comercial” y la NTP 111.023-2008 “Evacuación de los productos de la combustión generado por artefactos a gas natural” y en adición el Reglamento Nacional de Edificaciones-2009 (EM-040). En la Norma NTP111.022-2008, existen dos conceptos importantes, que son: el Ratio de Ventilación, que es el volumen de aire (m3) entre la potencia térmica (KW) instalada en el recinto interior donde se ubicarán los artefactos a gas natural y/o GLP y el Espacio Confinado, que es el recinto interior cuyo volumen es menor a 4.8 m3/KW (50pie3/1000 BTU) de potencia nominal agregada o conjunta de todos los artefactos a gas instalados. En la obtención de la potencia no se consideran los artefactos tipo C”. En la primera parte de la presente tesis se presenta, la parte teórica y cálculos realizados con el espacio confinado con la NTP 111 022-2008. En la segunda parte, se realizan las pruebas en el laboratorio y los resultados obtenidos se grafican para obtener el Ratio de Ventilación en un recinto interior, ubicado en el laboratorio de Ingeniería de Petróleo y Gas natural – UNI, cuyo cálculo es el objetivo de la tesis.
Discipline: Maestría en Ciencias con Mención en Ingeniería de Petróleo y Gas Natural
Grade or title grantor: Universidad Nacional de Ingeniería. Facultad de Ingeniería de Petróleo, Gas Natural y Petroquímica. Unidad de Posgrado
Grade or title: Maestro en Ciencias con Mención en Ingeniería de Petróleo y Gas Natural
Register date: 28-Mar-2017; 28-Mar-2017



This item is licensed under a Creative Commons License Creative Commons