Look-up in Google Scholar
Title: Mejora de las propiedades mecánicas del acero SAE 1040 mediante procesos de tratamiento térmico
Advisor(s): Valverde Espinoza, Santiago Gualberto
Issue Date: 2011
Institution: Universidad Nacional de Ingeniería
Abstract: The objective of thís thesís is to improve the mechanical properties SAE 1040 steel through heat treatment of tempering and temple, the temple was carried out at a temperature of 850º C then cooling the specimen in water and tempering were used for different range of temperaturas between 200º C and SOOº C and the time between 1.5 and 2.5 hours. Different results were obtained in the maximum tensile strength, hardness Rockwell C, and the impact test, was used as a basis the hexagonal design with 9 tests initial and subsequent widened to 36 tests and 36 results which were obtained using the MATLAB software is graphical response surfaces. In response surface can be seen the optima! values from the technological poínt and that could be used for the manufacture of parts for industrial use.

El objetivo de la presente Tesis es el de mejorar las propiedades mecánicas del acero SAE 1040 mediante los tratamientos térmicos de Temple y revenido, el temple se realizó a la temperatura de 850º C enfriando posteriormente la probeta en agua y para el revenido se usaron diferentes temperatura y tiempos, el rango de las temperaturas fueron entre los 200º C y los 500° C y del tiempo entre las 0.5 y 2. 5 horas. Se obtuvieron diferentes resultados en la máxima resistencia a la tracción, Dureza Rockwell C, y el ensayo de impacto, se usó como base el Diseño Hexagonal con 9 pruebas iniciales y posteriormente se ampliaron hasta 36 pruebas obteniéndose 36 resultados, los cuales mediante el uso del software MATLAB se gráfico las superficies de respuesta. En las superficies de respuesta se puede apreciar los valores óptimos desde el punto de vista tecnológico y que podrían usarse para la fabricación de piezas de uso industrial.
Discipline: Maestría en Ciencias con Mención en Ciencia de los Materiales
Grade or title grantor: Universidad Nacional de Ingeniería. Facultad de Ingeniería Mecánica. Unidad de Posgrado
Grade or title: Maestro en Ciencias con Mención en Ciencia de los Materiales
Register date: 25-Aug-2015; 25-Aug-2015



This item is licensed under a Creative Commons License Creative Commons