Look-up in Google Scholar
Title: Análisis del comportamiento del sistema de sostenimiento en filones auríferos sub horizontales mediante la aplicación de woodpack en labores mineras subterráneas en Consorcio Minero Horizonte S.A.
Advisor(s): Pehovaz Álvarez, Humberto Iván
OCDE field: http://purl.org/pe-repo/ocde/ford#2.00.00
Issue Date: 20-May-2023
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: Esta investigación para el análisis de comportamiento y funcionamiento del sostenimiento en la unidad minera de la empresa Consorcio Minero Horizonte (CMH) se realizó en 4 etapas. La primera etapa, consiste en la recolección de información de campo y procesamiento de ésta, para realizar la clasificación geomecánica del macizo rocoso del lugar de interés. La segunda Etapa, con la información de la labor de estudio, se determina el alcance máximo de la zona de plastificación considerando las secciones de diseño planteadas por el área de planeamiento y el span de la labor. La tercera etapa, se calcula la presión que se genera sobre el sostenimiento y la resistencia que ofrece este último. Finalmente, en la cuarta etapa se realizan testeos con diferentes espaciamientos y dimensiones del woodpack para su posterior validación o no del funcionamiento del elemento de sostenimiento. Se concluye que la deformación de la roca en los alrededores de la labor está en función del ángulo de inclinación de la veta; es decir, si entre 2 vetas la diferencia de buzamiento es 5º, la deformación se incrementa en 22% y si se tiene una diferencia de buzamiento de 20º, la deformación se incrementa en 47%. En relación con los espaciamientos considerados: 0.70m, 1.00m, 1.30m, 1.50m, 2.30m y 3.00m; se determinó que el espaciamiento óptimo es de 1.50m con woodpacks de 0.60m de ancho con 1.00m de largo; el mismo que representa un ahorro de 12.46% de consumo de m3 madera con respecto a woodpacks de dimensiones de 0.60m y 1.20m para un avance de explotación de 22m.

This investigation for the analysis of behavior and operation of support in the mining unit of the company Consorcio Minero Horizonte (CMH) was carried out in 4 stages. The first stage, consists of the collection of field information and its processing, to carry out the geomechanical classification of the rock mass of the place of interest. The second stage, with the information from the study work, determines the maximum scope of the plastification zone considering the design sections proposed by the planning area and the span of the work. The third stage, calculates the pressure that is generated on the support and the resistance offered by the latter. Finally, in the fourth stage, tests are carried out with different spacings and dimensions of the woodpack for its subsequent validation or not of the operation of the support element. In this study, it is concluded that the deformation of the rock in the surroundings of the work is a function of the angle of inclination of the vein; that is, if the dip difference between 2 veins is 5º, the deformation increases by 22% and if there is a dip difference of 20º, the deformation increases by 47%. In relation to the spacing considered: 0.70m, 1.00m, 1.30m, 1.50m, 2.30m and 3.00m; It was determined that the optimal spacing is 1.50m with woodpacks of 0.60m wide and 1.00m long; the same that represents a saving of 12.46% of consumption of m3 wood with respect to woodpacks of dimensions of 0.60m and 1.20m for an advance of exploitation of 22m.
Discipline: Ingeniería Minera
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingeniería
Grade or title: Ingeniero de Gestión Minera
Juror: Jara Céspedes, Juan; Arauzo Gallardo, Luis; Aramburú Rojas, Vidal
Register date: 11-Aug-2023



This item is licensed under a Creative Commons License Creative Commons