Look-up in Google Scholar
Title: Estudio comparativo entre el método de elementos finitos y el indice smr mediante un análisis de estabilidad para un talud de roca en el sector virgen de fatima – San Juan de Lurigancho
Other Titles: Comparative Study Between the Finite Element Method and the Smr Index by Means of a Stability Analysis for a Rock Slope in the Virgen de Fatima Sector – San Juan de Lurigancho
Advisor(s): Vásquez Najarro, Jimmy
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01; http://purl.org/pe-repo/ocde/ford#2.00.00
Issue Date: 17-Jun-2023
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: The delimited area for the research that was taken in this thesis, has been in the Virgen de Fátima Sector, to be more specific in the human settlements "Cerrito rico-Nueva Jerusalem" and "Towards development", which are located in the district of San Juan de Lurigancho. Both sectors are made up of granodiorite rock material that has the characteristics of being weathered and fractured, which causes the alteration of their respective geotechnical properties. To meet the main objective, two methods were proposed for the stability analysis: the SMR index and the finite element method with the phase2 software, where the slopes with the greatest dip were worked, stations ET-001, ET-003 and ET. -004. On the one hand, the type of failure of each station was identified through a cinematographic analysis. Likewise, the type of constitutive model suitable for an analysis in a rock mass was evaluated, such as the generalized Hoek Brown criterion, which should determine the input parameters for numerical modeling. On the other hand, the SMR index was calculated from the RMR assessment, considering the corresponding definition factors. Finally, the results of both methods were similar in terms of stability, on the one hand, a deterministic method such as the SMR index and a numerical method such as the finite element method, in addition the parameters used by both methods for the analysis of comparative.

El área delimitada para la investigación que se tomó en esta tesis, ha sido en el Sector Virgen de Fátima, para ser más específicos en los asentamientos humanos “Cerrito rico-Nueva Jerusalén” y “Hacia el desarrollo”, las cuales están ubicadas en el distrito de San juan de Lurigancho. Ambos sectores están constituidos por el material de roca granodiorita y gabrodiorita que tienen como características estar meteorizadas y fracturadas, lo cual provoca la alteración de sus respectivas propiedades geotécnicas. Para cumplir con el objetivo principal se propuso dos métodos para el análisis de estabilidad el índice SMR y el método de elementos finitos con el software phase2, donde se trabajó con los taludes de mayor buzamiento, las estaciones ET-001, ET-003 y ET-004. Por un lado, se identificó el tipo de falla de cada estación mediante un análisis cinemático. Asimismo, se evaluó el tipo de modelo constitutivo adecuado para un análisis en un macizo rocoso como es el criterio generalizado de Hoek Brown, el cual sirvió para hallar los parámetros de entrada para el modelamiento numérico. Por otro lado, se calculó el índice SMR a partir de la valoración del RMR, considerando los factores de ajustes correspondientes. Finalmente, los resultados de ambos métodos fueron similares a nivel de estabilidad, por un lado, un método determinístico como el índice SMR y un método numérico como es el método de elementos finitos, además se evaluó los parámetros que utilizan ambos métodos para el análisis de comparativo.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingeniería
Grade or title: Ingeniero Civil
Juror: Soto Dueñas, Milagros; Duran Ramirez, Gary; Estrada Polanco, Lydice
Register date: 14-Jul-2023; 14-Jul-2023



This item is licensed under a Creative Commons License Creative Commons