Look-up in Google Scholar
Title: Análisis de la capacidad vial y niveles de servicio en la carretera nacional 3s, tramo desde la intersección de la Calle Almudena – Av. Antonio Lorena hasta el Arco Tica Tica
Advisor(s): Pérez Montesinos, Jean Fernando
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.00
Issue Date: 14-Mar-2023
Institution: Universidad Andina del Cusco
Abstract: La presente investigación tiene como propósito analizar la capacidad vial y nivel de servicio en el tramo “Intersección de la calle Almudena-Av. Antonio Lorena hasta el Arco Tica Tica”, debido al peligro constante que existe para los usuarios que transitan por esta, este estudio hace uso de la metodología HCM, con ayuda del software de simulación (Synchro11). La investigación detalla cada una de las etapas ejecutadas, desde el levantamiento de información en campo, procedimiento de análisis de datos y análisis de resultados; para la determinación de las condiciones de tráfico se realizó aforos vehiculares y peatonales en 11 intersecciones, considerando las horas de mayor demanda; para la determinación de condiciones geométricas se realizó el levantamiento topográfico; y para la determinación de condiciones semaforizadas se realizó un inventario detallado de los semáforos existentes, con estos datos se procede al cálculo de la capacidad vial y nivel de servicio basado en el HCM incorporándolos en el software de simulación Synchro11, con el que se realiza la simulación de dichas intersecciones en el estado actual y en la propuesta (implementando bermas centrales, dispositivos de control e intersecciones semaforizadas). Los resultados obtenidos determinan que en la vía la capacidad vial y nivel de servicio son insuficientes para la demanda vehicular actual, también se demuestra que con la propuesta mejora el nivel de servicio y aumenta capacidad vial. Asimismo, se llega a la conclusión de que con la propuesta resultada una mayor capacidad vial y un mejor nivel de servicio para el tramo de estudio.

The purpose of this research is to analyze the road capacity and level of service in the section "Intersection of Almudena-Av. Antonio Lorena to the Tica Tica Arch", due to the constant danger that exists for the users who transit through it, this study makes use of the HCM methodology, with the help of simulation software (Synchro11). The investigation details each of the stages carried out, from the gathering of information in the field, data analysis procedure and analysis of results; To determine traffic conditions, vehicular and pedestrian gauging was carried out at 11 intersections, considering the hours of greatest demand; for the determination of geometric conditions, the topographical survey was carried out; and for the determination of traffic light conditions, a detailed inventory of the existing traffic lights was carried out, with these data we proceed to calculate the road capacity and level of service based on the HCM, incorporating them into the Synchro11 simulation software, with which the Simulation of said intersections in the current state and in the proposal (implementing central shoulders, control devices and signalized intersections). The results obtained determine that on the road the road capacity and level of service are insufficient for the current vehicular demand, it is also shown that the proposal improves the level of service and increases road capacity. Likewise, it is concluded that the proposal results in greater road capacity and a better level of service for the section of study.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Andina del Cusco. Facultad de Ingeniería y Arquitectura
Grade or title: Ingeniero Civil
Juror: Arohuanca Sosa, Rode Luz; Gutierrez Carlotto, Ed; Zevallos Guzmán, Herbert Jesús; Flores Dueñas, Miguel Alfredo
Register date: 4-Jul-2023; 4-Jul-2023



This item is licensed under a Creative Commons License Creative Commons