Look-up in Google Scholar
Title: Incidencia en la durabilidad del concreto diseñado con adición de PET (tereftalato de polietileno) al 0.1%, 0.5% y 1.0% respecto a uno convencional en elementos estructurales de viviendas en el distrito de Ancón – Lima
Advisor(s): HUERTA CAMPOS, CARLOS ALBERTO
OCDE field: https://purl.org/pe-repo/ocde/ford#2.00.00; https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: Mar-2023
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: La investigación titulada "Incidencia en la durabilidad del concreto diseñado con adición de PET (tereftalato de polietileno) al 0.1%, 0.5% y 1.0% respecto a uno convencional en elementos estructurales de viviendas en el distrito de Ancón – Lima", es de metodología experimental y tiene como objetivo determinar efecto en la durabilidad con la adición de escamas de PET, realizando los ensayos sobre las propiedades de durabilidad del concreto convencional el cual debe estar en estado endurecido, y así como identificar el porcentaje óptimo. Los materiales utilizados en esta investigación son: cemento portland SOL tipo 1, agregado grueso y agregado fino de la cantera San Martin. El material PET se obtiene de la trituración de botellas de plástico recicladas. La investigación consta de un diseño de concreto con adición de escamas PET en porcentajes de 0.1%, 0.5% y 1.0%, de acuerdo con las pruebas de resistencia a la compresión a los 7, 14 y 28 días, y se encontró que, con el aumento de la cantidad de PET, la resistencia a la compresión disminuyó y las muestras que contenían 0.10% de PET alcanzaron un resultado promedio de menor disminución en la fuerza compresiva. Se realizaron ensayos de durabilidad del concreto a los 70, 80 y 90 días, en estado endurecido, los resultados de absorción de agua a 70, 80 y 90 días muestran que, en comparación con otras muestras, la mezcla que contiene 0.10% de PET tiene la menor absorción de agua, lo que también se confirma en la prueba del porcentaje de volumen de poros permeables, obtenido con la misma muestra. El mejor resultado es la muestra con 0.10% de PET se comportó mejor en términos de resistencia a la compresión y otras propiedades que se ensayaron.

The investigation entitled "Incidence on the durability of concrete designed with the addition of PET (polyethylene terephthalate) at 0.1%, 0.5% and 1.0% compared to a conventional one in structural elements of houses in the district of Ancón - Lima", is based on methodology experimental and aims to determine the effect on durability with the addition of PET flakes, which tests on the properties of conventional concrete which must be in a hardened state, and as well as to identify the optimal percentage. The materials used in this investigation are: Portland cement SOL type 1, coarse aggregate and fine aggregate from the San Martin quarry. PET material is obtained from the crushing of recycled plastic bottles. The research recycles PET samples adding flakes to the concrete in percentages of 0.1%, 0.5% and 1.0% according to the compressive strength tests at 7, 14 and 28 days, it was found that, with the increase in the quantity of PET, the compressive strength decreased and the samples containing 0.10% PET achieved an average result of less decrease in compressive strength. The water absorption results at 70, 80 and 90 days showed that, compared to other samples, the mixture containing 0.10% PET has the lowest water absorption, which is also confirmed in the test of the percentage of permeable pore volume. obtained with the same sample. The best result is the sample with 0.10% PET performed better in terms of compressive strength and other properties that were tested.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). División de Estudios Profesionales para Ejecutivos (EPE)
Grade or title: Ingeniero Civil
Juror: Eyzaguirre Acosta, Carlos; Rodriguez Barboza, José; Rodriguez Dionisio, Sandra
Register date: 25-Apr-2023; 25-Apr-2023



This item is licensed under a Creative Commons License Creative Commons