Look-up in Google Scholar
Full metadata record
Orihuela Dávila, Junior Didi
Patiño Luna, Victor Rolando
2022-10-28T19:41:28Z
2022-10-28T19:41:28Z
2022-10-28T19:41:28Z
2022-10-28T19:41:28Z
2022-07-12
0000 0001 2196 144X (isni)
http://hdl.handle.net/10757/661464
La presente tesis plantea establecer una guía con los criterios necesarios para el análisis y diseño de una nave industrial de acero estructural A36 en la ciudad de Lima, la cual podrá ser sometida a diferentes condiciones de carga independientemente de la ubicación geográfica del proyecto. En primer lugar, se presenta una recopilación del fundamento teórico necesario sobre las características y propiedades del acero. Asimismo, incluirá el análisis y diseño de elementos estructurales, con distintas condiciones y combinaciones de carga según las normas peruanas vigentes y las especificaciones del manual del American Institute of Steel Construction (AISC). Luego de ello, se procede a realizar un modelo en el software SAP2000 según el predimensionamiento de los elementos estructurales, del cual obtendremos las cargas actuantes en la estructura que nos servirá para diseñar los elementos estructurales de la nave industrial. Además, se obtendrá los desplazamientos de la estructura que serán comparados con los valores máximos permitidos. Finalmente, se presentarán planos de detalle de los elementos diseñados de la nave industrial. (es_PE)
This thesis aims to establish a guide with the necessary criteria for the analysis and design of an A36 structural steel industrial warehouse in the city of Lima, which may be subjected to different load conditions regardless of the geographical location of the project. Firstly, a compilation of the necessary theoretical foundation on the characteristics and properties of steel is presented. Furthermore, it will include the analysis and design of structural elements, with different conditions and load combinations according to current Peruvian standards and the specifications of the American Institute of Steel Construction (AISC) manual. After that, a model is made in the SAP2000 software according to the pre-sizing of the structural elements, from which we will obtain the loads acting on the structure that will help us design the structural elements of the industrial warehouse. In addition, the displacements of the structure will be obtained, which will be compared with the maximum allowed values. Finally, detailed plans of the designed elements of the industrial warehouse will be presented. (es_PE)
Tesis (es_PE)
application/pdf (es_PE)
application/epub (es_PE)
application/msword (es_PE)
spa (es_PE)
Universidad Peruana de Ciencias Aplicadas (UPC) (es_PE)
Attribution-NonCommercial-ShareAlike 4.0 International (*)
info:eu-repo/semantics/openAccess (es_PE)
http://creativecommons.org/licenses/by-nc-sa/4.0/ (*)
Universidad Peruana de Ciencias Aplicadas (UPC) (es_PE)
Repositorio Académico - UPC (es_PE)
Industrial building (es_PE)
Nave industrial (es_PE)
Diseño estructural (es_PE)
Análisis sísmico (es_PE)
Acero estructural (es_PE)
Structural design (es_PE)
Seismic analysis (es_PE)
Structural steel (es_PE)
Análisis y diseño de una nave industrial para almacenes en la ciudad de Lima, mediante las especificaciones del manual del AISC y la normativa peruana (es_PE)
Analysis and Design of an Industrial Building for Warehouses in Lima City, Through the Specifications of the Aisc Manual and Peruvian Regulations (es_PE)
Tesis (other)
info:eu-repo/semantics/bachelorThesis (es_PE)
Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingeniería (es_PE)
Ingeniería Civil (es_PE)
Licenciatura (es_PE)
Ingeniero Civil (es_PE)
PE (es_PE)
https://purl.org/pe-repo/ocde/ford#2.01.01 (es_PE)
http://purl.org/pe-repo/ocde/ford#2.00.00 (es_PE)
https://purl.org/pe-repo/renati/level#tituloProfesional (es_PE)
https://orcid.org/0000-0002-0209-2055 (es_PE)
732016 (es_PE)
http://purl.org/pe-repo/renati/type#tesis (es_PE)
Privada societaria



This item is licensed under a Creative Commons License Creative Commons