Look-up in Google Scholar
Title: Propuesta de reforzamiento de viviendas autoconstruidas con ladrillo artesanal de 1, 2 y 3 pisos ubicadas en suelo S3 usando malla de fibra de vidrio AR y mortero de alta resistencia
Other Titles: Proposal for the reinforcement of self-built houses with 1, 2 and 3-story artisanal brick located on S3 soil using AR fiberglass mesh and high-resistance mortar
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01; http://purl.org/pe-repo/ocde/ford#2.00.00
Issue Date: 20-Sep-2022
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: La presente investigación tiene como objetivo proponer un reforzamiento con malla de fibra de vidrio AR y mortero de alta resistencia para disminuir la vulnerabilidad sísmica de viviendas autoconstruidas con ladrillo artesanal y comparar en términos de costo- beneficio con la aplicación de malla electrosoldada. Para ello, se identificaron tres modelos de "viviendas autoconstruidas" ubicadas en la ladera de un cerro, que es una realidad de los centros poblados urbanos de la periferia de Lima. Luego, se les realizó a estas tres viviendas el análisis lineal de acuerdo con lo establecido en la normativa peruana E.030 y E.070. De este modo, se logró identificar los muros más vulnerables que requieren ser reforzados. En base a códigos internacionales se calculó el aporte de las mallas de fibra de vidrio y las mallas electrosoldadas. Asimismo, siguiendo las provisiones del AT-40, se realizó el diseño por desempeño de las viviendas sin refuerzo y con refuerzo. Para ello, se requirió realizar el análisis no lineal estático "Pushover" y la determinación de los espectros de demanda sísmica que establece la norma peruana y de los registros sísmicos, con lo cual se obtuvo el nivel desempeño sísmico de las viviendas As Built y de las viviendas reforzadas. Finalmente, se realizó un comparativo en términos de Costo-Beneficio entre las técnicas de refuerzo estudiadas. En este sentido, se obtuvo que la malla de fibra de vidrio AR con mortero de alta resistencia se perfila como una potencial técnica de refuerzo para viviendas de albañilería confinada.

The present research aims to propose a reinforcement with AR fiberglass mesh and high-resistance mortar to reduce the seismic vulnerability of self-built houses with handmade bricks and to compare in terms of cost-benefit with the application of electrowelded mesh. For this, three models of "self-built houses" located on the side of a hill were identified, which is a reality in the urban populated centers of the periphery of Lima. Then, the linear analysis was performed on these three houses in accordance with the provisions of the Peruvian regulations E.030 and E.070. In this way, it was possible to identify the most vulnerable walls that need to be reinforced. Based on international codes, the contribution of fiberglass meshes and electrowelded meshes was calculated. Likewise, following the provisions of AT-40, the performance design of the houses without reinforcement and with reinforcement was carried out. For this, it was required to carry out the static nonlinear analysis "Pushover" and the determination of the seismic demand spectra established by the Peruvian standard and of the seismic records, with which the seismic performance level of the As Built houses and of the reinforced houses. Finally, a comparison was made in terms of Cost-Benefit between the reinforcement techniques studied. In this sense, it was obtained that AR fiberglass mesh with high-strength mortar is emerging as a potential reinforcement technique for confined masonry houses.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingeniería
Grade or title: Ingeniero Civil
Register date: 10-Oct-2022; 10-Oct-2022



This item is licensed under a Creative Commons License Creative Commons