Look-up in Google Scholar
Title: Análisis de las propiedades mecánicas de una arcilla parcialmente saturada de mediana plasticidad en el distrito de banda de Shilcayo, San Martin, Perú
Advisor(s): Duran Ramirez, Gary
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01; http://purl.org/pe-repo/ocde/ford#2.00.00
Issue Date: 12-Sep-2022
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: The objective of this research work is the evaluation of the matrix suction that may present the clay of the locality of Banda de Shilcayo - San Martin, in order to determine the characteristic curve that represents the study soil and validate the results obtained with theoretical models. In addition, it will be sought to associate the matrix suction variable and the moisture content with the increase or decrease of the mechanical parameters of the soil. Matrix suction will be determined using the guidelines described in the international standard ASTM D-5298 "Standard test method for measuring soil suction potential using filter paper". This indirect method uses filter papers as passive sensors for the evaluation of matrix suction in soil, since, as the filter paper is in direct contact with the soil sample inside an airtight container, the pore water vapor pressure of the specimen is balanced with the partial water vapor pressure of the air. The matrix suction will be measured in twenty specimens using the filter paper method, however, before performing the suction measurement, different amounts of moisture will be imposed on the specimens for a certain period of time, thus obtaining enough information to plot the soil characteristic curve, which describes the relationship between the matrix suction versus different amounts of moisture (degree of saturation, volumetric moisture or volumetric moisture). It will be sought to show the relationship between the variation of suction and the water retention capacity in the soil pores and, finally, a comparison will be made between the mechanical parameters of the soil under study with different imposed amounts of matrix suction. The aim of this research is to contribute to the limited knowledge that we currently have about unsaturated soils, a broad and complex subject, in the hope that it will serve as a support for further research.

El objetivo de este trabajo de investigación es analizar las propiedades mecánicas de una arcilla parcialmente saturada de mediana plasticidad, relacionado con la variable de la succión matricial y contenido de humedad, que podrá presentar la arcilla de la localidad de Banda de Shilcayo – San Martin, con la finalidad de, determinar la curva característica que represente al suelo de estudio y validar los resultados obtenidos con modelos teóricos. Además, se buscará asociar la variable de succión matricial y el contenido de humedad con el aumento o disminución de los parámetros mecánicos del suelo. La succión matricial se determinará empleando los lineamientos descritos en la norma internacional ASTM D-5298 “Método de prueba estándar de medición de la succión potencial del suelo utilizando papel filtro”. Este método indirecto usa los papeles filtro como sensores pasivos para la evaluación de la succión matricial en el suelo, ya que, al encontrarse el papel filtro en contacto directo con la muestra de suelo dentro de un recipiente hermético, se equilibran la presión de vapor de agua de poros del espécimen con la presión parcial de vapor de agua del aire. La succión matricial se medirá en veinte especímenes usando el método de papel filtro, sin embargo, antes de realizar la medición de succión se impondrán distintas cantidades de humedad en los especímenes por un periodo determinado de tiempo, logrando de esta forma, tener la información suficiente para graficar la curva característica del suelo, la cual, describe la relación entre la succión matricial versus distintas cantidades de humedad (Grado de saturación y humedad volumétrica)Se buscará mostrar relación que existe entre la variación de la succión y la capacidad de retención de agua en los poros del suelo y, por último, se realizará un comparativo entre los parámetros mecánicos del suelo de estudio con distintas cantidades impuestas de succión matricial. Mediante esta investigación se busca aportar dentro del conocimiento limitado que tenemos actualmente sobre los suelos no saturados, tema amplio y complejo, esperando que sirva de apoyo para siguientes investigaciones.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingeniería
Grade or title: Ingeniero Civil
Register date: 28-Sep-2022; 28-Sep-2022



This item is licensed under a Creative Commons License Creative Commons