Look-up in Google Scholar
Title: Estudio de prefactibilidad para la instalación de una planta productora de prótesis de extremidades en base a tecnología de impresión 3D y Arduino
Other Titles: Prefeasibility study for the installation of a limb prosthesis production plant based on 3d printing technology and Arduin
Advisor(s): Paredes Larroca, Fabricio Humberto
OCDE field: https://purl.org/pe-repo/ocde/ford#2.11.04
Issue Date: 2021
Institution: Universidad de Lima
Abstract: n this pre-feasibility study, the technical, economic, market and environmental feasibility of the implementation of a manufacturing plant for 3D printed limb prostheses, integrated by electronic components, is analyzed. Market studies were carried out to define, observe, analyze and verify that a prosthesis integrated with the aforementioned technology will be well accepted by consumers thanks to the innovation and the quality-price ratio of the product. Subsequently, trends and patterns of consumption were analyzed in order to obtain the project's demand, for which the projection of apparent domestic demand was used as a methodology through the linear regression of historical data using the potential equation as a model. The same that allowed us to determine the commercial viability of the present pre-feasibility study. Our market was segmented into people from the city of Metropolitan Lima, from 5 to 70 years old who belong to the NSE A, B and C. Also, by applying the segmentation corresponding to the target demand, a total of 1 248 prostheses are estimated to be sold for the first year and 2 170 prostheses for the fifth year. To obtain these values, quantitative and qualitative information sources were used that can be seen in the corresponding chapter and annexes. On the other hand, in order to define the technical viability, an investigation was carried out to determine the optimal location of the plant through micro and macro location methods. As a result, it was obtained that the optimal location of the plant will be in La Victoria, mainly due to the availability and price of land, in addition to its proximity to the target market and because it is a central district. Limiting factors were analyzed: market size, productive resources, technology, investment and equilibrium point to be able to define the optimal plant size. Thus, it was obtained that the market size is the limitation of the project with 2 170 prostheses / year. An analysis of the engineering required by the project was carried out, obtaining as a result the technical definitions of the product, necessary technologies, capacities, services and methods of quality, safety and environmental assurance. In addition, it was determined that 4 operators and an installation area of the plant of 455,4 m2 will be necessary. Finally, the economic, financial and social viability of the pre-feasibility study was determined. For this, investments, income, expenses and production costs were budgeted, in order to prepare financial statements that were subsequently analyzed to obtain financial and economic ratios. After the financial analysis, it was obtained that 40% of the necessary investment will be financed, while 60% will be own investment. In the first year a net profit of S/ 1 047 014 would be obtained and the last year of S/ 1 832 321. In the economic evaluation, a NPV of S/ 262 707,59 and an IRR of 31,01%. On the other hand, in the financial evaluation a NPV of S/ 538 139,67 and an IRR of 37,36%.

En el presente estudio de prefactibilidad se analiza la viabilidad técnica, económica, de mercado y ambiental de la implementación de una planta productora de prótesis de extremidades impresas en 3D, integradas por componentes electrónicos. Se realizaron estudios de mercado para definir, observar, analizar y comprobar que una prótesis integrada con la tecnología mencionada será bien aceptada por los consumidores gracias a la innovación y a la relación calidad-precio del producto. Posteriormente, se analizaron tendencias y patrones de consumo que busquen obtener la demanda del proyecto, para los cuales se utilizó como metodología la proyección de la demanda interna aparente a través de la regresión lineal de data histórica utilizando como modelo la ecuación potencial. La misma que nos permitió determinar la viabilidad comercial del presente estudio de prefactibilidad. Se segmentó nuestro mercado en personas de la ciudad de Lima Metropolitana, de 5 a 70 años que pertenezcan a los NSE A, B y C. Asimismo, aplicando la segmentación correspondiente a la demanda objetivo se proyecta un total de 1 248 prótesis vendidas para el primer año y 2 170 prótesis para el quinto año. Para obtener estos valores se utilizaron fuentes de información cuantitativa y cualitativa que se pueden apreciar en el capítulo y anexos correspondientes. Por otro lado, para poder definir la viabilidad técnica, se realizó una investigación que determine mediante métodos de micro y macro localización la óptima ubicación de la planta. Se obtuvo como resultado, que la óptima localización de la planta será en La Victoria debido principalmente a la disponibilidad y precio de terrenos, además de la cercanía al mercado objetivo y por ser un distrito céntrico. Se analizaron los factores limitantes: tamaño del mercado, recursos productivos, tecnología, inversión y punto de equilibrio para poder definir el tamaño de planta óptimo. Así se obtuvo que el tamaño de mercado es el limitante del proyecto con 2 170 prótesis/año. Se realizó el análisis acerca de la ingeniería requerida por el proyecto, obteniendo como resultado las definiciones técnicas del producto, tecnologías necesarias, capacidades, servicios y métodos de aseguramiento de la calidad, seguridad y medio ambiente. Además, se determinó que serán necesarios 4 operarios y un área de instalación de la planta de 455,4 m2. Finalmente, se determinó la viabilidad económica, financiera y social del estudio de prefactibilidad. Para ello, se presupuestaron las inversiones, ingresos, gastos y costos de producción, a efectos de elaborar los estados financieros que posteriormente fueron analizados para obtener ratios financieros y económicos. Luego del análisis financiero se obtuvo que el 40% de la inversión necesaria será financiada, mientras que el 60% será inversión propia. En el primer año se obtendría una utilidad neta de 1 047 014 soles y el último año de 1 832 321. En la evaluación económica se obtuvo un VAN de S/ 262 707,59 y un TIR de 31,01%. Por otro lado, en la evaluación financiera se obtuvo un VAN de S/ 538 139,67 y de TIR de 37,36%.
Discipline: Ingeniería Industrial
Grade or title grantor: Universidad de Lima. Facultad de Ingeniería y Arquitectura
Grade or title: Ingeniero Industrial
Juror: Cieza de León Tuesta, Eduardo José; Paredes Larroca, Fabricio Humberto; Avalos Ortecho, Edilberto Miguel; Moy Vargas, Luis Teodomiro
Register date: 31-Aug-2022; 31-Aug-2022



This item is licensed under a Creative Commons License Creative Commons