Look-up in Google Scholar
Title: Control del fisuramiento por retracción plástica mediante el uso de fibra de maguey como adición del concreto para su aplicación en losas aligeradas
Other Titles: Control of plastic shrinkage cracking by using maguey fiber as an addition to concrete for application in lightened slabs
Advisor(s): Eyzaguirre Acosta, Carlos Augusto
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01; http://purl.org/pe-repo/ocde/ford#2.00.00
Issue Date: 27-Mar-2022
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: The objective of this research was to determine the effectiveness of concrete added with maguey fiber in the control of plastic shrinkage cracking compared to conventional concrete, for its application in lightened slabs in the city of Huánuco, characterized by its high temperature gradients, Fibers whose lengths were between 4 and 5 mm were used, with dosages of 0.25%, 0.50% and 0.75% with respect to the volume of concrete used. With the application of this research, it will also be known which type of dosage has the best performance to control plastic shrinkage cracking in concrete without significantly compromising the strength of hardened concrete. The experimentation of this project began by describing the physical-mechanical properties of the materials that would be used in the design of concrete and then the performance evaluation of the concrete in fresh and hardened state was carried out, the evaluations were taken comparing a control group of concrete without addition of fibers and another with the aforementioned dosages, the main evaluation related to plastic shrinkage cracking was carried out using the test parameters of ASTM C1579-13 whose final data were measured with a cracking meter and recorded using observational records. The results obtained were that from the lowest dosage of 0.25% maguey fiber, a reduction in cracking is achieved, on the other hand, the dosage with the best performance to control plastic shrinkage cracking, maintaining concrete strength at optimal levels. the standard design without fiber is 0.50%.

La presenta investigación tuvo como objetivo determinar la eficacia del concreto adicionado con fibra de maguey en el control del fisuramiento por retracción plástica en comparación al concreto convencional, para su aplicación en losas aligeradas de la ciudad de Huánuco ,caracterizada por sus altas gradientes de temperatura, se hicieron uso de fibras cuyas longitudes estaban entre 4 y 5 mm, con dosificaciones del 0.25%, 0.50% y 0.75% respecto al volumen del concreto empleado. Con la aplicación de esta investigación se conocerá también que tipo de dosificación tiene mejor desempeño para controlar el fisuramiento por retracción plástica en el concreto sin comprometer significativamente la resistencia del concreto endurecido. La experimentación de este proyecto comenzó describiendo las propiedades físico-mecánicas de los materiales que se usarían en el diseño de concreto para luego realizarse la evaluación del desempeño del concreto en estado fresco y endurecido, las evaluaciones fueron tomadas comparando un grupo control de concreto sin adición de fibras y otro con las dosificaciones mencionadas, la evaluación principal referida a la fisuración por retracción plástica se realizó mediante los parámetros del ensayo del ASTM C1579-13 cuyos datos finales fueron medidos con un fisurómetro y registrados mediante fichas observacionales. Los resultados obtenidos fueron que desde la dosificación más baja de 0.25% de fibra de maguey se logra una reducción de la fisuración, por otro lado, la dosificación con mejor desempeño para controlar la fisuración por retracción plástica manteniendo la resistencia del concreto en niveles óptimos respecto al diseño patrón sin fibra es del 0.50%.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingeniería
Grade or title: Ingeniero Civil
Register date: 25-Jul-2022; 25-Jul-2022



This item is licensed under a Creative Commons License Creative Commons