Look-up in Google Scholar
Title: Mejora de las propiedades mecánicas de los bloques de tierra comprimida (BTC) reforzados con cemento y fibra natural
Advisor(s): Eyzaguirre Acosta, Carlos Augusto
OCDE field: http://purl.org/pe-repo/ocde/ford#2.00.00
Issue Date: 11-Jan-2021
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: There is currently an intense constant search for less polluting resources and technologies, which consume less energy in construction. Natural fiber reinforced compressed earth block (BTC) can be an effective alternative. This study presents the results of an investigation to establish the mechanical properties of BTC stabilized with cement and reinforced with cane bagasse fiber. It was considered to evaluate the following combinations BTC, BTCE (6% cement), BTC-I (4% cement and 0.5% fiber) and BTC-II (4% cement and 1% fiber). In addition, the results of the mechanical tests were compared with established norms and with other research related to the subject. It was observed that, with the increase of cement, the strength of the earth blocks begins to increase gradually. But nevertheless, the amount of cement can be reduced by replacing it with a minimum of 0.5% natural fiber in the dry state, representing low resistance losses. From the reach it is suggested to analyze design coefficients at different conditions, considering that a minimum of 4% cement and 0.5-1% fiber was enough to produce BTC that comply with the provisions of the Peruvian standard.

Existe en la actualidad una intensa búsqueda constante de recursos y tecnologías menos contaminantes, que consumen menos energía en la construcción. El bloque de tierra comprimida (BTC) reforzado con fibra natural puede ser una alternativa efectiva. Este estudio presenta los resultados de una investigación para establecer las propiedades mecánicas del BTC estabilizado con cemento y reforzado con fibra de bagazo de caña. Se consideró evaluar las siguientes combinaciones BTC, BTCE (6% de cemento), BTCB-I (4% de cemento y 0.5% de fibra) y BTC-II (4% de cemento y 1% de fibra). Además, los resultados de las pruebas mecánicas se compararon con normas establecidas y con otras investigaciones relacionadas al tema. Se observó que, con el aumento de cemento, la resistencia de los bloques de tierra comienza a incrementarse gradualmente. Sin embargo, se puede reducir la cantidad de cemento reemplazándola con un mínimo de 0.5% de fibra natural en estado seco, representando bajas pérdidas de resistencia. De la investigación se sugieren analizar coeficientes de diseño a diferentes condiciones, considerando que con un mínimo de 4% de cemento y un 0.5-1% de fibra fue suficiente para producir BTC que cumplan con los requisitos estipulados en la norma peruana.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingeniería
Grade or title: Bachiller en Ingeniería Civil
Register date: 22-Feb-2021; 22-Feb-2021



This item is licensed under a Creative Commons License Creative Commons