Look-up in Google Scholar
Title: Análisis y diseño sísmico por desempeño de los bloques A, B y C del departamento de ordenamiento territorial y construcción de la UNALM según el código ATC-40
Other Titles: Analysis and seismic design for performance of block A, B and C of the department of land use and construction of the UNALM according to the ATC-40 code
Advisor(s): Moreno Sanchez, Javier Daniel
Issue Date: 3-Aug-2020
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: La presente tesis trata de demostrar que la norma peruana de diseño sismoresitente debe evolucionar y tener mayores exigencias en instituciones de uso esencial, por lo que se evaluará los daños obtenidos mediante un diseño con la Norma E-030 y el ACT-40 ante diferentes niveles sísmicos a los bloques A, B y C de la facultad de Ingeniería Agrícola de la UNALM, para ello en el primer capítulo se explicará la evolución de la norma de diseño sismoresistente E-030 y de algunas normas internacionales como el ATC. En el capítulo 2, se dará a conocer la clasificación de los parámetros de desempeño que tienen las estructuras según el código ATC-40 para el diseño por desempeño. En el siguiente capítulo, se presentarán los bloques diseñados. Mientras que en el capítulo 4 y 5 se realizará un análisis y diseño estructural con la Norma E030 y el ATC-40, respectivamente. Finalmente, en el capítulo 6 Y 7 se presentará una comparación entre los niveles de daños producidos en los elementos mediante el monitoreo de las deformaciones (giros y desplazamientos) comprándolas con los límites de aceptación de las normas mencionadas anteriormente.

This thesis tries to demonstrate that the Peruvian standard of earthquake-resistant design must evolve and have greater demands in institutions of essential use, so that the damages obtained through a design with Standard E-030 and ACT-40 will be evaluated at different levels Seismic blocks A, B and C of the Faculty of Agricultural Engineering of the UNALM, for this in the first chapter the evolution of the E-030 earthquake resistant design standard and some international standards such as the ATC will be explained. In chapter 2, the classification of performance parameters that structures have according to the ATC-40 code for performance design will be announced. In the next chapter, the designed blocks will be presented. While in Chapter 4 and 5 an analysis and structural design will be carried out with Standard E030 and ATC-40, respectively. Finally, in chapter 6 and 7 a comparison will be presented between the levels of damage caused to the elements by monitoring the deformations (turns and displacements) by buying them with the limits of acceptance of the aforementioned standards.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingeniería
Grade or title: Ingeniero Civil
Register date: 27-Aug-2020; 27-Aug-2020



This item is licensed under a Creative Commons License Creative Commons