Look-up in Google Scholar
Title: Comparación In Vitro de la resistencia al cizallamiento de estructuras de resina y cerómero con tratamiento de arenado en diferentes tiempos
Other Titles: In Vitro Comparison of the shear bond strength of structures using resin and ceromer with air abrasion treatment in different times
Advisor(s): Hermoza Novoa, Mónica Mercedes
Issue Date: 11-Dec-2019
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: Objetivo: Comparar in vitro la resistencia al cizallamiento de especímenes de resina cementados a muestras de cerómero con tratamiento de arenado en 3 diferentes tiempos. Materiales y métodos: La muestra estuvo conformada por 45 especímenes. La unidad de análisis estuvo constituida por cilindros de resina (Filtek TM Z350 3M- USA) y cerómero (Base Dentine VITAVM®LC - Germany). Se formaron 3 grupos (n=15), en donde el grupo control no recibió tratamiento de arenado, el grupo 1 recibió tratamiento de arenado por 5 segundos y el grupo 2, por 10 segundos. Se utilizaron para el tratamiento de arenado, partículas de óxido de aluminio de 50 μm a una distancia de 10 mm y con una presión de 2.5 bares. Asimismo, se realizó la evaluación de patrón de fractura luego de realizar la prueba de cizallamiento. Los datos fueron analizados mediante estadística descriptiva (media, mediana, desviación estándar y rango intercuartílico) y la comparación de las variables, resistencia al cizallamiento y tiempo de arenado, se realizó mediante la prueba de Kruskal Wallis. (p ≤ 0.05). Resultados: Las medias registradas para el grupo sin arenado fue de 8.40 ± 2.13 MPa, el grupo de 5 segundos fue 9.20 ± 2.06 MPa y el grupo de 10 segundos fue 12.54 ± 3.97 MPa. Se observaron diferencias estadísticamente significativas en el grupo con arenado por 10 segundos en comparación a los grupos sin arenado y arenado a 5 segundos (p=0.008). Las fallas de tipo mixta fueron las que presentaron mayor porcentaje con un 66.7%. Conclusión: El arenado con óxido de aluminio por 10 segundos sobre la superficie del cerómero mejoró significativamente la resistencia al cizallamiento en comparación al arenado por 0 y 5 segundos.

Objective: Compare In vitro the shear bond strengths of specimens consisting of cemented resin to samples of Ceromer with 3 different times of air abrasion treatment. Materials and Methods: The sample consisted of 45 specimens. The specimens were made up of cylinders of resin (Filtek TM Z350 3M- USA) and the ceromer (Base Dentine VITAVM®LC - Germany). Three (3) groups were formed (n=15): The control group did not receive the air abrasion treatment, the first group received the air abrasion treatment for five seconds, and the second group received the treatment for ten seconds. The air abrasion treatment consisted of aluminum oxide of 50 μm from a distance of 10 mm and with a pressure of 2.5 bares. The data was analyzed through descriptive statistics (mean, median, standard deviation and interquartile range) and the comparison of the variables, shear bond strength and air abrasion time, were analyzed using the Kruskal Wallis test. (p ≤ 0.05). Results: The measurements for the group without air abrasion was 8.40 ± 2.13 Mpa. The group receiving air abrasion treatment for five seconds yielded 9.20± 2.06 Mpa. Finally, the group receiving air abrasion treatment for ten seconds yielded 12.54 ± 3.97 Mpa. Statistically significant differences were observed in the group with 10 seconds of abrasion treatment in comparison to the other groups (p=0.008). The mixed type failures were those that presented the highest percentage at 66.7%. Conclusion: The air abrasion with aluminum oxide for ten seconds on the surface of the ceromer significantly improved the sheer bond strength in comparison to the samples that received 0 and 5 seconds.
Discipline: Odontología
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ciencias de la Salud
Grade or title: Cirujano dentista
Register date: 13-Feb-2020; 13-Feb-2020



This item is licensed under a Creative Commons License Creative Commons