Look-up in Google Scholar
Title: Implementación de un sistema automático de bombeo de agua utilizando energía renovable en una parcela agrícola de cultivo de cítricos en Chanchamayo - Junín
Advisor(s): Sánchez Penadillo, Edward Russel
OCDE field: https://purl.org/pe-repo/ocde/ford#2.11.03
Issue Date: 2020
Institution: Universidad Tecnológica del Perú
Abstract: This project is focused on the development of an automatic water pumping system for irrigation, which in its entirety will be used for agriculture.This system will consist of parts, a mechanical part and a control part, that is, the automation of the system. For the system to be self-sufficient, it will use renewable energy that for the mechanical part will use the potential energy of the water and for the control part it will use solar energy, which will be stored in batteries, thus giving the autonomy of the system during the 24 hours of the day. day. [sic] For the development of the mechanical part, the design of a ram pump will be used, using the Autodesk Inventor program.On the other hand, for the design of the control system, a PLC (Programmable Logic Control) will be used, which in this case, due to the number of sensors and actuators, will serve us using the Siemnes Brand PLC and the 24V Logo model.The main purpose of the project is to control the automatic start, purge and shutdown of the mechanical water pumping system when the water reception tank is full and the vacuum chamber is purged when it is filled with water reaching a pressure higher than 5 bar pressure.Upon completion of the development and implementation, the objective of reaching the height required by the company Agricola Chirani S.A.C was achieved, also the cost of the Project was within the budget.

El presente proyecto está enfocado en el desarrollo de un sistema automático de bombeo de agua para riego, que en su totalidad será destinado para la agricultura. Este sistema constará de partes, una parte mecánica y la otra de control es decir la automatización del sistema. Para que el sistema se [sic] autosuficiente usara [sic] la energía renovable que para la parte mecánica usara [sic] la propia energía potencial del agua y para la parte de control usara la energía solar, el cual será almacenada en baterías dando así la autonomía del sistema durante las 24 horas del día. Para el desarrollo de la parte mecánica se usará el diseño de una bomba de ariete, usando el programa Autodesk Inventor. Por otro lado para el diseño del sistema de control se usará un PLC (Control Lógico Programable), que en este caso por la cantidad de sensores y actuadores nos servirá el uso del PLC de la Marca Siemens y de modelo Logo de 24V.El proyecto tiene como finalidad principal controlar el inicio, purga y apago automático del sistema mecánico de bombeo de agua cuando el tanque de recepción del agua se encuentre lleno y se purgue la cámara de vacío cuando este se llene de agua alcanzando una presión mayor a los 5 bares de presión. Al culminar el desarrollo e implementación se logró el objetivo de alcanzar la altura requerida por la empresa Agrícola Chirani S.A.C, así mismo el costo del proyecto se encontró dentro del presupuesto.
Note: Campus Lima Centro
Discipline: Ingeniería Mecatrónica
Grade or title grantor: Universidad Tecnológica del Perú. Facultad de Ingeniería
Grade or title: Ingeniero Mecatrónico
Register date: 17-Dec-2021; 17-Dec-2021



This item is licensed under a Creative Commons License Creative Commons