Look-up in Google Scholar
Title: Influencia de la adición del mineral pirita en la resistencia a la compresión, resistencia a la flexión y asentamiento de un concreto f’c=210 kg/cm2 para cimentaciones, Trujillo 2020
Advisor(s): Vásquez Díaz, Alberto Rubén
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 17-Sep-2021
Institution: Universidad Privada del Norte
Abstract: La presente investigación fue realizada en la ciudad de Trujillo, logrando determinar la influencia de la adición del mineral pirita en el asentamiento, resistencia a la compresión y resistencia a la flexión de un concreto f’c=210 kg/cm2 para cimentaciones; el diseño experimental usado fue cuasi experimental, con muestreo probabilístico M.A.S.; también se usó una hoja de ficha de datos como instrumento de recolección de datos; el problema central es que una cimentación deficiente pondrá en peligro no sólo a la infraestructura, sino la integridad de sus ocupantes, por lo cual se realizó un diseño de mezcla utilizando cemento tipo I y agregados de la cantera Quebrada El León, juntamente con mineral pirita en adiciones de 5, 10 y 15%, para luego elaborar un total de 48 probetas cilíndricas de 10cmx20cm curadas a edades de 3,7 y 28 días; y 16 vigas de concreto de 150mmx150mm curadas a edades de 14 y 28 días, obteniendo como resultado que al 5% de adición de pirita, el concreto logra la mayor resistencia en sus propiedades mecánicas, con 454kg/cm2 para compresión y 50.4 kg/cm2 para flexión a edad de 28 días de curado, que es cuando el concreto alcanza su máxima resistencia.

The present investigation was carried out in the city of Trujillo, managing to determine the influence of the addition of the mineral pyrite in the settlement, compressive strength and flexural strength of a concrete f'c = 210 kg / cm2 for foundations; the experimental design used was quasi-experimental, with probability sampling M.A.S .; A data sheet was also used as a data collection instrument; The central problem is that a deficient foundation will endanger not only the infrastructure, but the integrity of its occupants, for which a mix design was carried out using type I cement and aggregates from the Quebrada El León quarry, together with mineral pyrite. in additions of 5, 10 and 15%, to later elaborate a total of 48 cylindrical specimens of 10cmx20cm cured at ages of 3.7 and 28 days; and 16 concrete beams of 150mmx150mm cured at ages of 14 and 28 days, obtaining as a result that at 5% addition of pyrite, the concrete achieves the highest resistance in its mechanical properties, with 454kg / cm2 for compression and 50.4 kg / cm2 for bending at the age of 28 days of cure, which is when the concrete reaches its maximum strength.
Note: Trujillo San Isidro
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Cornejo Rodriguez, Sheyla Yuliana; Rodriguez Beltran, Eduar Jose; Villar Quiroz, Josualdo Carlos
Register date: 2-Dec-2021; 2-Dec-2021



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.