Look-up in Google Scholar
Title: Análisis de las propiedades físico-mecánicas de un concreto elaborado con ceniza volante en porcentajes de 10%, 20% y 30% en sustitución parcial de cemento.
Advisor(s): Chacón Sánchez, Víctor
Issue Date: 7-Sep-2017
Institution: Universidad Andina del Cusco
Abstract: The research study presented is framed in the City of Cusco, where it was oriented to the study of the physical - mechanical properties of a concrete f'c = 210kg / cm2 with partial replacement of the cement by fly ash from the Ilo21 thermoelectric power station in percentages Of 10%, 20% and 30% said measures in percentages of the weight of the cement. The main properties investigated in the dry state were the compressive and flexural strength, and also a study of concrete production costs at the input level, the concrete mixture was made with coarse aggregate from the Vicho quarry, fine aggregate Of the Vicho and Cunyac quarry and Portland cement type IP, compression and flexural strength tests were performed at ages of 7.14 and 28 days. The mixing design f'c = 210 kg / cm2 was prepared according to ACI 211, when the concrete mix was carried out, the consistency parameters were checked according to the mixing design, a cement set time test was carried out and another For the cement with ash in its different percentages evaluated in this investigation, with the obtained mixture was developed cylindrical specimens of 10cm x 20cm for tests of resistance to compression and beams of 15cm x 15cm x 50 cm for tests of resistance to flexion to the Thirds of the beam. According to the results, the mixture added with fly ash in replacement of the cement in percentages of 10%, 20% and 30% improves the resistance properties of a mixture f'c = 210kg / cm2 also showing a decrease of its resistances with With respect to the standard concrete f'cr = 295 kg / cm2. It should also be mentioned that the analysis of production costs of concrete at the level of inputs shows a reduction proportional to the percentage of cement replaced for each case of mixture investigated.

RESUMEN El estudio de investigación presentado se enmarca en la Ciudad del Cusco, donde fue orientado el estudio de las propiedades físico – mecánicas de un concreto f’c=210kg/cm2 con sustitución parcial del cemento por ceniza volante proveniente de la central termoeléctrica Ilo21 en porcentajes de 10%, 20% y 30 % dichas medidas en porcentajes del peso del cemento. Las principales propiedades investigadas en estado seco fueron: resistencia a compresión y resistencia flexión, realizando también un estudio de costos de producción del concreto a nivel de insumos, la mezcla de concreto se realizó con agregado grueso proveniente de la cantera de Vicho, agregado fino proveniente de la cantera Vicho y Cunyac y cemento Portland tipo IP, los ensayos de resistencia a compresión y flexión fueron realizados a edades de 7,14 y 28 días. El diseño de mezcla f’c=210kg/cm2 se elaboró de acuerdo al ACI 211, al realizar la mezcla de concreto se verifico los parámetros de consistencia de acuerdo al diseño de mezcla, se realizó un ensayo de tiempo de fraguado al cemento y otro para el cemento con ceniza en sus diferentes porcentajes evaluados en esta investigación, con la mezcla obtenida se elaboró probetas cilíndricas de 10cm x 20cm para ensayos de resistencia a la compresión y viguetas de 15cm x 15cm x 50 cm para ensayos de resistencia a flexión a los tercios de la viga. De acuerdo a los resultados, la mezcla adicionada con ceniza volante en reemplazo del cemento en porcentajes de 10%, 20% y 30% mejoran las propiedades de resistencia de una mezcla f’c=210kg/cm2 mostrando también una disminución de sus resistencias con respecto al concreto patrón f’cr=295kg/cm2. Cabe mencionar también que el análisis de costos de producción del concreto a nivel de insumos, muestra una reducción proporcional al porcentaje de cemento sustituido para cada caso de mezcla investigada
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Andina del Cusco. Facultad de Ingeniería y Arquitectura
Grade or title: Ingeniero Civil
Register date: 17-Oct-2017; 17-Oct-2017



This item is licensed under a Creative Commons License Creative Commons