Look-up in Google Scholar
Title: Solución automatizada para el control térmico del horno de tratamiento de Turbinas Pelton-Francis utilizando Hardware y Software libre.
Advisor(s): Carrasco Poblete, Edwin
Issue Date: 2017
Institution: Universidad Andina del Cusco
Abstract: The present work of thesis has as beginning automate the control of temperature of the oven of thermal treatment. To acquire the readings by means of a Logical Programmable Controller, then to send by means of a protocol of communication to a computer Raspberry Pi, and this way to observe in a user's Interface the reading of real time temperatures and the curve of thermal treatment. In this work tests were realized in the workshop of EGEMSA's Maintenance, Raspberry Pi designed an Interface in the computer with the obtained information, using the language of programming Python. The supervision, control and acquisition of information - SCADA, is administered by a Logical Programmable Controller of the Brand Schneider Electric, this Controller receives signs of the sensors of temperature or thermocouples that are located in different parts of the bun of the turbine then to send them to the Interface and to be able to visualize them. The control of the automation, it is under the parameters of temperatures this way to dose the heat that the buns need, and to liberate the tensions generated during the process of weld and burnished.

El presente trabajo de tesis tiene como principio automatizar el control de temperatura del horno de tratamiento térmico. Adquirir las lecturas por medio de un Controlador Lógico Programable, para luego enviar mediante un protocolo de comunicación a un ordenador Raspberry Pi, y así observar en una Interfaz de usuario la lectura de temperaturas en tiempo real y la curva de tratamiento térmico. En ese trabajo se realizó pruebas en el taller de Mantenimiento de EGEMSA, se diseñó una Interfaz en el ordenador Raspberry Pi con los datos obtenidos, utilizando el lenguaje de programación Python. La supervisión, control y adquisición de datos – SCADA, está administrado por un Controlador Lógico Programable de la Marca Schneider Electric, este Controlador recibe señales de los sensores de temperatura o termocuplas que están ubicados en diferentes partes del rodete de la turbina para luego enviarlas a la Interfaz y poder visualizarlas. El control de la automatización, está bajo los parámetros de temperaturas para así dosificar el calor que requieren los rodetes, y liberar las tensiones generadas durante el proceso de soldadura y esmerilado.
Discipline: Ingeniería de Sistemas
Grade or title grantor: Universidad Andina del Cusco. Facultad de Ingeniería y Arquitectura
Grade or title: Ingeniero de Sistemas
Register date: 13-Oct-2017; 13-Oct-2017



This item is licensed under a Creative Commons License Creative Commons