Look-up in Google Scholar
Title: Análisis comparativo de las propiedades reológicas del concreto f´c=210 kg/cm2 con un concreto con superplastificante del 0.6% - 1.5%, Cusco 2018
Advisor(s): Álvarez Espinoza, Jorge
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.03
Issue Date: 16-Dec-2020
Institution: Universidad Andina del Cusco
Abstract: The present investigation was carried out to comparatively analyze the rheological properties of a concrete f´c = 210 kg / cm² with another concrete supplied with a 0.6%, 0.8%, 1% and 1.5% superplasticizer additive; those that were made with Portland type IP cement from the Yura brand, fine aggregates from the Cunyac and Huambutio quarries, ¾” coarse aggregate from the Vicho quarry and Mapei-Dynamon SP1 superplasticizer additive from Italy. Using the design of mixtures of the ACI method, studied in fresh state with the three rheological properties; stability, mobility and compactability, which were evaluated through 6 tests; exudation, segregation, viscosity, cohesion, density and compaction factor that were made for concrete f´c = 210 kg / cm² and for concrete with superplasticizer additive. The Peruvian Technical Standards were applied, such as in the case of NTP 339.218, NTP 339.077, NTP 339.035 and NTP 339.046 for the segregation, exudation, settlement and density tests respectively. The British Standard 1881: part 103 for the de facto compaction test and the viscosity test as it did not have a specific standard was evaluated by the author Irving H. Shames from the book of fluid mechanics; Also, for the manufacture of the devices that were used in the segregation, exudation, density, compaction factor and viscosity tests were manufactured applying the Peruvian Technical Standards and foreign standards mentioned above.

Se realizó la presente investigación para analizar comparativamente las propiedades reológicas un concreto f´c=210 kg/cm² con otro concreto suministrado con aditivo superplastificante al 0.6%, 0.8%, 1% y 1.5%; los que fueron elaborados con cemento portland tipo IP de la marca Yura, agregados finos de las canteras de Cunyac y Huambutio, agregado grueso de ¾” de la cantera de Vicho y aditivo superplastificante Mapei-Dynamon SP1 proveniente de Italia. Utilizando el diseño de mezclas del método ACI, estudiado en estado fresco con las tres propiedades reológicas; estabilidad, movilidad y compactabilidad, las mismas que fueron evaluadas mediante 6 ensayos; exudación, segregación, viscosidad, cohesión, densidad y factor de compactación que fueron realizados para el concreto f´c=210 kg/cm² como para el concreto con aditivo superplastificante. Se aplicaron las Normas Técnicas Peruanas como es en el caso de la NTP 339.218, NTP 339.077, NTP 339.035 y NTP 339.046 para los ensayos de segregación, exudación, asentamiento y densidad respectivamente. La Norma British Standart 1881: parte 103 para el ensayo de facto de compactación y en el ensayo de viscosidad al no tener una normativa específica se evaluó mediante el autor Irving H. Shames del libro de mecánica de fluidos; asimismo para la fabricación de los aparatos que se usaron en los ensayos de segregación, exudación, densidad, factor de compactación y viscosidad fueron fabricados aplicándose las Normas Técnicas Peruanas y normas extranjeras mencionadas líneas arriba.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Andina del Cusco. Facultad de Ingeniería y Arquitectura
Grade or title: Ingeniero Civil
Juror: Arohuanca Sosa, Rode Luz; Olazaval Rodriguez, Maria Milagros; Chura Cortez, Cesar Augusto; Alvarez Monterola, Walter Roberto
Register date: 4-Aug-2021; 4-Aug-2021



This item is licensed under a Creative Commons License Creative Commons