Look-up in Google Scholar
Title: Influencia de los aditivos plastificantes chema-plast y plastiment HE-98 en las propiedades del concreto para la obtención de concreto de alta resistencia, Trujillo - 2018
Advisor(s): Vásquez Diaz, Alberto Rubén
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 15-Apr-2019
Institution: Universidad Privada del Norte
Abstract: El propósito de la presente investigación es determinar la influencia de los aditivos plastificantes Chema-Plast y Plastiment HE-98 en las propiedades del concreto para la obtención de concreto de alta resistencia f’c 380 kgf/cm2. En las construcciones que se realizan en Trujillo, se requiere mantener o mejorar la trabajabilidad del concreto y para ello muchas veces se recurre a incrementar agua en la mezcla con la consecuente reducción de resistencia, lo que repercutirá directamente en la seguridad estructural frente a las solicitaciones de gravedad y sismos. Para la realización de los ensayos se fabricaron probetas cilíndricas con un diseño de mezcla patrón f’c 380 kgf/cm2 y probetas con aditivo. Teniendo en cuenta el criterio de las Normas Técnicas Peruanas (NTP), la Sociedad Americana de Materiales de Prueba (ASTM) y el Instituto Americano de Concreto (ACI), las probetas se ensayaron a los 7, 14 y 28 días después de su fabricación. Los resultados demuestran que las probetas con aditivo Plastiment HE-98 aumentaron su trabajabilidad hasta en un 500% respecto al patrón. En el caso de resistencia a la compresión a los 7. 14 y 28 días con la adición de aditivo en un 0.5%, esta no presenta un aumento significativo según el programa estadístico SPSS. Por otro lado, las probetas con aditivo Chema-Plast reducen su trabajabilidad hasta en un 60% respecto al patrón. Como no se pudo determinar la resistencia a la compresión de estas probetas con la adición desde el 1% al 2.5% de aditivo, se tuvo que reajustar aumentándole en un 20% más de A/C, logrando así obtener el asentamiento adecuado y demostrando que no hay un aumenta en su resistencia a la compresión a los 7, 14 y 28 días respecto al patrón. Con estos resultados concluimos que el uso de aditivo Plastiment HE-98 es mejor que el Chema-Plast dado que influye de manera positiva en la trabajabilidad y mantiene su resistencia por encima del límite de compresión f’c 380 kgf/cm2 entre el 0.5% y 1.5% de contenido de aditivo.

The purpose of the present investigation is to determine the influence of the plasticising additives Chema-Plast and Plastiment HE-98 on the concrete properties for obtaining high strength concrete f'c 380 kgf / cm2. In the constructions that are made in Trujillo, it is required to maintain or improve the workability of the concrete and for this many time it is used to increase water in the mixture with the consequent reduction of resistance, which will directly affect the structural safety against the stresses of gravity and earthquakes. To carry out the tests, cylindrical specimens with a standard mix design f'c 380 kgf / cm2 and specimens with additive were manufactured. Taking into account the criteria of the Peruvian Technical Standards (NTP), the American Society for Test Materials (ASTM) and the American Concrete Institute (ACI), the test pieces were tested at 7, 14 and 28 days after their manufacture. The results show that the samples with additive Plastiment HE-98 increased their workability up to 500% with respect to the standard. In the case of resistance to compression at 7. 14 and 28 days with the addition of 0.5% additive, this does not show a significant increase according to the statistical program SPSS. On the other hand, the samples with Chema-Plast additive reduce their workability up to 60% with respect to the standard. As it was not possible to determine the compressive strength of these specimens with the addition of 1% to 2.5% additive, it had to be readjusted by increasing it by 20% more A / C, thus achieving the proper settlement and demonstrating that there is no increase in its resistance to compression at 7, 14 and 28 days compared to the pattern. With these results we conclude that the use of Plastiment HE-98 additive is better than the Chema-Plast as it positively influences the workability and maintains its resistance above the compression limit f'c 380 kgf / cm2 between 0.5% and 1.5% additive content.
Note: Trujillo San Isidro
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Register date: 13-May-2019; 13-May-2019



This item is licensed under a Creative Commons License Creative Commons