Look-up in Google Scholar
Title: Simulación del diseño de un sistema de bombeo fotovoltaico para la prestación del servicio de agua potable
OCDE field: https://purl.org/pe-repo/ocde/ford#2.11.04
Issue Date: 2020
Institution: Universidad Tecnológica del Perú
Abstract: The objective of this research project is to design a photovoltaic pumping system at the simulation level to improve the availability of drinking water service to users of the company studied. The pertinent bibliographic review was carried out in the theoretical framework and state of the art to be able to execute the design. The applied methodology consists of three theoretical, numerical and validation phases, in order to carry out the activities that the research merits. Data was collected from the current hydraulic pumping system, such as height 55 m, distance 326 m, flow 13.90 l / s, total demand 250 m3 and the current offer by the company 200 m3; With this, the design of the photovoltaic pumping system was carried out on an Excel spreadsheet. The simulations were then run with three pump time settings of 3 hours, 4 hours, and 5 hours. The results of the simulations were with the first configuration of 3 hours of pumping, 60% in availability was reached, the second configuration with a time of 4 hours of work achieved 80% availability and finally the third configuration with 5 hours pumping reaches 100% of availability, covering the total demand. Consequently, the design allows to improve the availability of drinking water for users.

El presente proyecto de investigación tiene por objetivo diseñar a nivel de simulación un sistema de bombeo fotovoltaico para mejorar la disponibilidad del servicio de agua potable hacia los usuarios de la empresa estudiada. Se realizo la revisión bibliográfica pertinente en el marco teórico y estado del arte para poder ejecutar el diseño. La metodología aplicada consta de tres fases teórica, numérica y validación, para poder desarrollar las actividades que amerita la investigación. Se recopilo datos del actual sistema de bombeo hidráulico como son altura 55 m, distancia de 326 m, caudal de 13.90 l/s, demanda total 250 m3 y la actual oferta por parte de la empresa 200 m3; con ello se procedió a realizar el diseño del sistema de bombeo fotovoltaico en una hoja de cálculo Excel. Luego, se ejecutó las simulaciones con tres configuraciones de tiempo de bombeo de 3 horas, 4 horas y 5 horas. Los resultados de las simulaciones fueron con la primera configuración de 3 horas de bombeo se alcanzó un 60 % en la disponibilidad, la segunda configuración con un tiempo de 4 horas de trabajo logro un 80 % de disponibilidad y por último la tercera configuración con 5 horas de bombeo alcanza el 100 % de la disponibilidad cubriendo el total de la demanda. En consecuencia, el diseño permite mejorar la disponibilidad del agua potable para los usuarios.
Note: Campus Arequipa
Discipline: Ingeniería Industrial
Grade or title grantor: Universidad Tecnológica del Perú. Facultad de Ingeniería
Grade or title: Bachiller en Ingeniería Industrial
Register date: 29-Nov-2020; 29-Nov-2020



This item is licensed under a Creative Commons License Creative Commons