Look-up in Google Scholar
Full metadata record
Gonzales Medina, Luz Eleana
Ynfantes Fuentes, Esthefany Yoselin
2020-07-16T23:18:16Z
2020-07-16T23:18:16Z
2020-07-16T23:18:16Z
2020-07-16T23:18:16Z
2020
https://hdl.handle.net/20.500.12867/3016
Campus Arequipa (sede)
El objetivo de la presente investigación es proponer un sistema de protección y seguridad ante caídas en trabajos en altura en la minera Cuajone; desarrollando una investigación no experimental, descriptivo utilizando como instrumento la observación estructurada y la matriz IPERC para luego realizar la prueba de resistencia a la rotura “denominada prueba de tracción” a la eslinga utilizada actualmente, para ser comparado con la normativa OSHA 1910 y ANSI Z-359, teniendo como resultado una carga máxima de 4374.05 libras fuerza, la cual no cumple con la normativa y estándares requeridos mencionada anteriormente. Dando como conclusión que al trabajar con el sistema contra caídas Gravity Sure-Line ByPass, garantizando la seguridad del trabajador evitando accidentes. Finalmente se da como recomendación para realizar mantenimiento de polines de retorno en la faja transportadora Overland el sistema de protección y seguridad contra caídas en trabajos en altura el sistema Gravity Sure-Line ByPass. (es_PE)
The objective of the present research is to propose a system of protection and safety against falls in works in height in the mining Cuajone; developing a research not experimental, descriptive using as an instrument the structured observation and the IPERC matrix to then carry out the test of resistance to breakage, known as the tensile test which is applied to the sling currently used, to be compared to OSHA 1910 and ANSI Z-359, resulting in a maximum load of 4374.05 pounds force, which does not meet the required standards and norms mentioned above. Concluding that by working with the Gravity Sure Line By-Pass fall control system, ensuring the safety of the worker avoiding accidents. Finally, the Gravity Sure Line By-Pass system is given as a recommendation for the maintenance of return poles in the Overland conveyor belt. (en_US)
Tesis (es_PE)
application/pdf (es_PE)
spa (es_PE)
Universidad Tecnológica del Perú (es_PE)
info:eu-repo/semantics/closedAccess (es_PE)
https://creativecommons.org/licenses/by-nc-nd/4.0/ (es_PE)
Universidad Tecnológica del Perú (es_PE)
Repositorio Institucional - UTP (es_PE)
Trabajo en altura (es_PE)
Gestión de riesgos (seguridad laboral) (es_PE)
Sistemas anticaídas (es_PE)
Propuesta de un sistema de protección contra caídas para trabajos en altura en el mantenimiento de polines de retorno de la faja transportadora Overland 203 en minera Cuajone, Moquegua 2019 (es_PE)
info:eu-repo/semantics/bachelorThesis (es_PE)
Universidad Tecnológica del Perú. Facultad de Ingeniería (es_PE)
Ingeniería de Seguridad Industrial y Minera (es_PE)
Título Profesional (es_PE)
Ingeniero de Seguridad Industrial y Minera (es_PE)
PE (es_PE)
https://purl.org/pe-repo/ocde/ford#2.11.04 (es_PE)
Pregrado (degree)
http://purl.org/pe-repo/renati/level#tituloProfesional (es_PE)
30962417
https://orcid.org/0000-0003-0402-8644 (es_PE)
70082163
724066 (es_PE)
Bernedo Tito, Edwin José
Morales Valdivia, Javier Antonio
Urday Gonzales, Ana Cecilia
http://purl.org/pe-repo/renati/type#tesis (es_PE)
Privada societaria
info:eu-repo/semantics/publishedVersion (es_PE)



This item is licensed under a Creative Commons License Creative Commons