Look-up in Google Scholar
Title: Propiedades mecánicas e hidrofóbicas de adobes compactados al incorporar estearato de zinc
Advisor(s): Mosqueira Moreno, Miguel Ángel
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 17-Jan-2019
Institution: Universidad Privada del Norte
Abstract: En esta investigación se ha realizado con la finalidad de determinar la variación de las propiedades mecánicas e hidrofóbicas de los adobes compactados al incorporar estearato de zinc con dosis entre el 1%, 2% y 3% del peso de la tierra a utilizar, mediante ensayos de laboratorio en las que se determinó las propiedades físicas del suelo como también los ensayos de rotura para determinar la resistencia a compresión que aumenta en 26%, aumenta en 3% y disminuye en 14% con la incorporación de 1%, 2% y 3% respectivamente referente a la resistencia obtenida del patrón que es de 30.14 kg/cm2 . Y la resistencia a tracción se nota que disminuye en 17%, 24% y 29% con la incorporación de 1%, 2%, 3% respectivamente referente a la resistencia a la tracción obtenida del patrón que es de 27.91 kg/cm2 . Y en cuanto a la absorción se obtuvo que disminuye en 6.31%,12.64% y 20.56% con la incorporación de 1%, 2%, 3% respectivamente referente a la absorción obtenida del patrón que es de 32.70%, evidenciándose que superó lo establecido en la hipótesis del 5% de variación, superando los valores establecidos en la norma E.080 que son de 10.2 kg/cm² y 0.81 kg/cm² de resistencia a compresión y a tracción respectivamente.

In this research has been carried out with the purpose of determining the variation of the mechanical and hydrophobic properties of the compacted adobes when incorporating zinc stearate with doses between 1%, 2% and 3% of the weight of the earth to be used, through tests of laboratory in which the physical properties of the soil were determined as well as the fracture tests to determine the resistance to compression that increases by 26%, increases by 3% and decreases by 14% with the incorporation of 1%, 2% and 3% respectively referring to the resistance obtained from the pattern that is 30.14 kg / cm2 . And the tensile strength is noticeable that it decreases by 17%, 24% and 29% with the incorporation of 1%, 2%, 3% respectively regarding the tensile strength obtained from the pattern which is 27.91 kg / cm2 . And as for the absorption was obtained that it decreases in 6.31%, 12.64% and 20.56% with the incorporation of 1%, 2%, 3% respectively referring to the absorption obtained from the pattern that is 32.70%, evidencing that it exceeded the established in the 5% variation hypothesis, exceeding the values established in the E.080 standard that are 10.2 kg / cm² and 0.81 kg / cm² of compression and tensile strength respectively.
Note: Cajamarca
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Aguilar Aliaga, Orlando; Quispe Rodríguez, Gerson; Mejía Díaz, Iván
Register date: 31-Jan-2019; 31-Jan-2019



This item is licensed under a Creative Commons License Creative Commons