Look-up in Google Scholar
Title: Diseño estructural de un edificio de oficinas con estructura de acero y losas colaborantes en la ciudad de Trujillo
Advisor(s): Villar Quiroz, Josualdo Carlos
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 16-Jul-2021
Institution: Universidad Privada del Norte
Abstract: En la presente tesis se desarrolló el diseño estructural de un edificio de estructura metálica (acero estructural) de 2 niveles para uso de oficinas, utilizando el sistema estructural de “Pórticos Ordinarios Concéntricamente Arriostrados (OCBF)” en ambas direcciones principales de la estructura. El edificio se encuentra ubicado dentro de la Urb. San Isidro en la ciudad de Trujillo, perteneciente a un suelo intermedio de capacidad portante de 1.21 kg/cm2 a la altura de la profundidad de desplante. Además, el edificio pertenece a una edificación esencial según la norma E.030 – 2016 de diseño sismorresistente. El diseño estructural de la edificación en mención se realizó procedimentalmente siguiendo los siguientes pasos: Configuración estructural, en el cual se realizó la estructuración y predimensionamiento de todos los elementos estructurales que conforman el edificio, respetando la arquitectura brindada. Análisis estructural, en el cual se realizó el metrado, modelación y análisis estructural de toda la estructura, para lo cual se utilizó el programa “SAP 2000”. Diseño estructural, en el cual se diseñaron todos los elementos estructurales que conforman el edificio mediante el método Load and Resistance Factor Design (LRFD) para condiciones de resistencia y el método Allowable Strength Design (ASD) para condiciones de servicio. El análisis y diseño estructural se realizaron acorde a los requerimientos de las normas E.020 (cargas), E.030 – 2016 (diseño sismorresistente), y E.090 – propuesta final 2016 (estructuras metálicas) del “Reglamento Nacional de Edificaciones”. Además, se tomó como referencia importante el “Steel Construction Manual 14th Edition” y la “Specification For Structural Steel Buildings – ANSI/ AISC 360-10” del American Institute of Steel Construction AISC.

In this research we developed the structural design of a two level of structural steel for use of officces, using the structural system of “Concentrically Oriented Ordinary Porous (OCBF)” in both main directions of the structure. The building is located inside the San Isidro urbanization in the city of Trujillo, belonging to an intermediate ground of carrying capacity of 1.21 kg / cm2 at the height of the shallow depth. In addition, the building belongs to an essential building according to the Norm E.030 - 2016 of Seismoresistant Design. The structural design of the building in question was carried out procedurally following the following steps: Structural configuration, in which the structuring and pre - sizing of all the structural elements that make up the building was carried out, respecting the architecture offered. Structural analysis, in which the metrado, modeling and structural analysis of the entire structure was performed, for which the "SAP 2000". Structural design, in which all the structural elements that make up the building were designed using the Load and Resistance Factor Design (LRFD) method for resistance conditions and the Allowable Strength Design (ASD) method for service conditions. The analysis and structural design are in accordance with the requirements of standards E.020 (loads), E.030 - 2016 (seismic resistant design), and E.090 - final proposal 2016 (metal structures) of the "National Building Regulations". In addition, the "Steel Construction Manual 14th Edition" and the “Specification For Structural Steel Buildings - ANSI / AISC 360-10” of the American Institute of Steel Construction AISC were taken as an important reference.
Note: Trujillo San Isidro
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Cornejo Rodriguez, Sheyla Yuliana; Díaz García, Gonzalo Hugo; Rodríguez Beltrán, Eduar José
Register date: 3-Nov-2021; 3-Nov-2021



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.