Look-up in Google Scholar
Title: Aplicación del tipo de material en la respuesta estructural y económica con la Norma ANSI/TIA 222-G en la torre de telecomunicaciones de 30m, Sullana 2020
Advisor(s): Tello Malpartida, Omart
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 2-Jan-2021
Institution: Universidad Privada del Norte
Abstract: El trabajo de investigación tuvo como objetivo determinar de qué manera la aplicación del tipo de material influye en la respuesta estructural y económica con la Norma ANSI/TIA 222-G en la Torre de Telecomunicaciones de 30m. La investigación es de tipo aplicada, el diseño de la investigación es cuasi experimental. La muestra no probabilística es una torre autosoportada triangular de 30m. El procedimiento consistió en analizar el modelo 1 que corresponde a una estructura de acero A36 y el modelo 2 corresponde a una estructura de acero A572 en las montante y acero A36 en el resto de la estructura. El análisis se efectuó con el apoyo del software MsTowerV6.20.1.11 para las distintas combinaciones especificadas en la noma ANSI/TIA 222-G. Se obtuvieron como resultados que el desplazamiento, torsión y deflexión, fueron menores en el modelo 1, en un 33.90%, 18.52% y 33.90% respectivamente al modelo 2. Ambos modelos cumplen con los valores máximos permitidos por el operador y la norma ANSI/TIA 222-G. Así tenemos que en el modelo 2 las reacciones y el peso fueron menores al modelo 1. El peso de la torre del modelo 2 se redujo en un 16% representando un menor costo. Determinándose que el modelo 2 es una mejor alternativa técnica y económica.

The research work aimed to determine how the application of the type of material influences the structural and economic response with the ANSI / TIA 222-G Standard in the 30m Telecommunications Tower. The research is applied, the research design is quasi-experimental. The non-probability sample is a 30m triangular self-supporting tower. The procedure consisted of analyzing model 1 that corresponds to an A36 steel structure and model 2 corresponds to an A572 steel structure in the uprights and A36 steel in the rest of the structure. The analysis was carried out with the support of the MsTowerV6.20.1.11 software for the different combinations specified in the ANSI / TIA 222-G standard. The results were obtained that the displacement, torsion and deflection were lower in model 1, by 33.90%, 18.52% and 33.90% respectively to model 2. Both models comply with the maximum values allowed by the operator and the ANSI / standard. TIA 222-G. Thus we have that in model 2 the reactions and weight were lower than in model 1. The weight of the tower in model 2 was reduced by 16% representing a lower cost. Determining that model 2 is a better technical and economic alternative.
Note: Los Olivos
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Quesada Llanto, Julio Christian; Canta Honores, Jorge Luis; Diaz Garcia, Gonzalo Hugo
Register date: 11-May-2021; 11-May-2021



This item is licensed under a Creative Commons License Creative Commons