Look-up in Google Scholar
Title: Propuesta de uso de relaves de mina polimetálica en la fabricación de unidades de albañilería - caso ex unidad minera Mercedes 3
Advisor(s): Tacza Zevallos, John Nelinho
Issue Date: 21-Feb-2019
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: Se propone la utilización de relave polimetálico de la Ex Unidad Minera Mercedes 3, que es uno de las 892 unidades que actualmente son pasivos ambientales mineros, para la fabricación de unidades de albañilería en el tipo de bloque de concreto estructural. La viabilidad de utilizar relaves de minería polimetálica como material de agregado para la fabricación de ladrillos fue investigado en este estudio. Se ha tratado el tema de la contaminación ambiental producto de los pasivos ambientales y componentes mineros. Se mencionan estudios similares para la fabricación de bloques de concreto con relave de minería de hierro. Un tema importante que se ha tomado en cuenta es el área de influencia ambiental de la relavera, situación poblacional y vivienda en la zona de estudio. Se realizó el diseño por dosificación de material y posteriormente se desarrolla el diseño de mezcla con el método del ACI. Se ensayaron los agregados incluido el relave, pruebas de toxicidad del relave y finalmente pruebas mecánicas de resistencia a la compresión. Uno de los puntos importantes es el nivel de toxicidad del relave, que se comprueba en última instancia con la mezcla de los demás agregados y cemento portland tipo I. Por último, se muestra datos relativos a costo del bloque de concreto con relave y el costo del bloque normal con las mismas características.

This experimental thesis proposes the use of polymetallic tailings from the former Mercedes 3 Mining Unit, which is one of the 892 units that are currently mining environmental liabilities, for the manufacture of masonry units in the type of structural concrete block. The feasibility of using polymetallic mining tailings as an aggregate material for the manufacture of bricks was investigated in this study. The issue of environmental pollution caused by environmental liabilities and mining components has been addressed. Similar studies are mentioned for the manufacture of concrete blocks with iron mining tailings. An important issue that has been taken into account is the area of environmental influence of the relavera, population situation and housing in the study area. The design was done by material dosing and then the mixing design was developed with the ACI method. The aggregates were tested including tailings, tailings toxicity tests and finally mechanical tests of compressive strength. One of the important points is the level of toxicity of the tailings, which is ultimately verified with the mixture of the other aggregates and portland type I cement. Finally, data relating to the cost of the concrete block with tailings and the cost of the normal block with the same characteristics are shown.
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de ingeniería
Grade or title: Ingeniero Civil
Register date: 14-Mar-2019; 14-Mar-2019



This item is licensed under a Creative Commons License Creative Commons