Look-up in Google Scholar
Title: Capacidad portante (CBR) de un suelo areno arcilloso con la incorporación de asfalto líquido RC- 250 al 2%, 4% y 6%
Advisor(s): Cubas Becerra, Alejandro
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 11-Dec-2019
Institution: Universidad Privada del Norte
Abstract: El objetivo de esta investigación es donde se determinó la capacidad portante (CBR) de un suelo areno arcilloso con la incorporación de asfalto líquido RC -250 al 2% 4% y 6%. Para el desarrollo de la presente investigación en primer lugar se obtuvieron las muestras de suelo obtenida en el Jr. Nicolás Arriola de la ciudad de Cajamarca, posteriormente se analizaron las muestras en el laboratorio de la Universidad Privada del Norte de Cajamarca. Para determinar la clasificación del suelo se realizaron los siguientes ensayos: contenido de humedad, peso específico, ensayo granulométrico y límites de Atterberg donde se clasificó con una simbología SC y A-2-6 según SUCS Y AASHTO que se describe como suelo de plasticidad baja a media con grava, arcillas arenosas. Luego se incorporó el asfalto RC- 250 en diferentes porcentajes procediendo a realizar el siguiente ensayo de compactación Proctor modificado y California Bearing Ratio (CBR), los datos obtenidos en los ensayos mencionados se analizaron para determinar las propiedades mecánicas de las muestras de suelo, se obtuvo los siguientes resultados: con la muestra patrón y la incorporación de asfalto RC - 250 al 2% , 4% y 6% se obtuvo un índice de CBR al 01 “de 5.8%, 9.01%, 11.00% y 12.2% y para un índice CBR al 0.2” se obtuvo 5.40%, 9.2%, 11.5% y 12.4% respectivamente . Con la adición del asfalto de RC -250 en porcentajes de 2%, 4% Y 6% el suelo extraído logró un aumento progresivamente del índice de CBR hasta un 200% en comparación a la muestra patrón.

he objective of this investigation is where the bearing capacity (CBR) of a clay sandy soil was determined with the incorporation of liquid asphalt RC -250 at 2% 4% and 6%. For the development of the present investigation, the soil samples obtained in Jr. Nicolás Arriola of the city of Cajamarca were first obtained, the samples were subsequently analyzed in the laboratory of the Private University of North Cajamarca. To determine the classification of the soil, the following tests were carried out: moisture content, specific weight, granulometric test and Atterberg limits where it was classified with an SC and A-2-6 symbology according to SUCS and AASHTO which is described as low plasticity soil half with gravel, sandy clays. The RC-250 asphalt was then incorporated in different percentages by performing the following modified Proctor compaction test and California Bearing Ratio (CBR), the data obtained in the aforementioned tests were analyzed to determine the mechanical properties of the soil sample, obtained the following results: with the standard sample and the incorporation of 2%, 4% and 6% RC-250 asphalt, a CBR index at 01 “of 5.8%, 9.01%, 11.00% and 12.2% was obtained and for a 0.2 ”CBR index was 5.40%, 9.2%, 11.5% and 12.4% respectively. With the addition of the asphalt of RC -250 in percentages of 2%, 4% and 6%, the soil extracted progressively increased the CBR index up to 200% compared to the standard sample.
Note: Cajamarca
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Register date: 9-Jan-2020; 9-Jan-2020



This item is licensed under a Creative Commons License Creative Commons