Look-up in Google Scholar
Title: Modelo para incrementar la eficiencia en el área de extrusión de una pyme manufacturera del sector plástico basada en 5s, SMED y mantenimiento autónomo
Other Titles: Model to improve the efficiency in the area of extrusion of a SME manufacturing of the plastic sector based on SMED, autonomous maintenance and 5s
Advisor(s): Viacava Campos, Gino Evangelista
OCDE field: https://purl.org/pe-repo/ocde/ford#2.11.04; http://purl.org/pe-repo/ocde/ford#2.00.00
Issue Date: 12-Aug-2021
Institution: Universidad Peruana de Ciencias Aplicadas (UPC)
Abstract: En el contexto actual, las pymes peruanas pertenecientes al sector plástico tienen un indicador de utilización de la capacidad instalada de alrededor del 71,45%. Este indicador mide el grado de aprovechamiento del potencial productivo, que se ve disminuido por problemas de eficiencia. En la empresa en estudio este indicador se encuentra por debajo de la media del sector, con una baja eficiencia del 78%, que se debe a averías, reprocesos y tiempo setup generados en las extrusoras. En este sentido, el presente trabajo propone un modelo para mejorar la eficiencia en el área de extrusión, el cual consiste en la aplicación integrada de herramientas Lean Manufacturing: 5s, SMED y mantenimiento autónomo. El primero se utiliza como herramienta de soporte para la ejecución de SMED y mantenimiento autónomo. La herramienta SMED puede reducir el tiempo setup mientras que el mantenimiento autónomo la cantidad de reprocesos y averías en el proceso de extrusión. Este modelo fue validado mediante la implementación de un piloto de la propuesta de solución. Los resultados obtenidos fueron el aumento de la disponibilidad en un 3% y la calidad en un 3%. Estos resultados juntos representan un aumento en la eficiencia del 78% al 83.7%.

In the current context, Peruvian SMEs that belong to the plastic sector have an indicator of installed capacity utilization of around 71.45%. This measures the degree of use of production potential, which is diminished by efficiency problems. In the company under study this indicator is below the sector average, with a low efficiency of 78%, which is caused by breakdowns, reprocesses and setup times generated in the extruder machines. In this sense, this article proposes a model to improve efficiency in the extrusion area consisting of the integrated application of Lean Manufacturing tools: 5s, SMED and autonomous maintenance. The first one is used as a support tool for the execution of SMED and autonomous maintenance. The SMED tool can reduce the configuration time while the autonomous maintenance had as a reduction the amount of reprocesses and breakdowns in the extrusion process. This model was validated by implementing a pilot of the solution proposal. The results obtained were the increase in availability in 3% and quality in 3%. These results together represent an increase in efficiency from 78% to 83.7%.
Discipline: Ingeniería Industrial
Grade or title grantor: Universidad Peruana de Ciencias Aplicadas (UPC). Facultad de Ingeniería
Grade or title: Ingeniero industrial
Register date: 12-Oct-2021; 12-Oct-2021



This item is licensed under a Creative Commons License Creative Commons