Look-up in Google Scholar
Title: Modelo “ULIRAM” para determinar nuevas composiciones químicas para materiales de aporte
Advisor(s): Rojas Tapia, Justo Alcides
OCDE field: https://purl.org/pe-repo/ocde/ford#2.07.01
Issue Date: 2004
Institution: Universidad Nacional Mayor de San Marcos
Abstract: The determination of the hardness in the steels tried thermally is complicated, because it depends on the chemical composition, cooling speed, etc. The hardness in hardfacing alloys obtained by electric welding on a base of steels of high alloy is even more complicated, because it depends of the variables as: the chemical composition, depth of the hardfacing, the structure, the temperature reached during the welding process, depth of the hardfacing, contributed heat, cooling speed, time of cooling, etc. Although diverse authors have been carried out many studies, it is not possible to predict the hardness for the different layers that, they are formed from the nucleus toward the surface in a welding formed on a steel of high alloy considering the influence of all the parameters. In the present investigation work is demonstrated that based on the pattern “ULIRAM” it is possible to predict new chemical compositions for welding, for that which was necessary to prepare test with the alloy ASM 1A with 1.8 alloy% applied independently on the materials base of ASM 1B with 10.60% and 11.30 alloy%, the effect of the carbon, chromium, welding depth to obtain the mathematical models for “ULIRAM-1 and ULIRAM-2 developed with experimental data. These models allow to calculate the hardness in function of the quantity of carbon, chromium and the depth of the hardfacing and to make predictions for values that have not been possible to measure them. The validity of the models will be evaluated having like base the ASM 1B, 10.60 alloy% and ASM, 11.30 alloy% with 3 depths and its corresponding chemical compositions. With the help of the pattern “ULIRAM” it will be possible to begin the production of new materials for hardfacing. The mathematical models for New Materials for hardfacing ULIRAM-1 and ULIRAM-2 obtained with the software statgraphics plus and feigned with the software Matlab are: Welding ULIRAM-1: HV igual 129.662 + 920.672%C - 53.5243%Cr + 52.9418X coefficient of correlation igual 99.93%. Welding ULIRAM-2 HV igual 128.815 + 1110.99%C - 76.951%Cr + 43.5185X coefficient of correlation igual 96.76%.

La determinación de la dureza en los aceros tratados térmicamente es complicada, porque depende de la composición química, velocidad de enfriamiento, etc. La dureza en revestimientos duros obtenidos por soldadura eléctrica sobre una base de aceros de alta aleación es aún más complicada, porque depende de las variables como: composición química, profundidad del revestimiento, microestructura, temperatura alcanzada durante el proceso de soldadura, profundidad del depósito, calor aportado, velocidad de enfriamiento, tiempo de enfriamiento, etc. A pesar de que diversos autores han realizado muchos estudios, no es posible todavía predecir la dureza para las diferentes capas que, se forman desde el núcleo hacia la superficie en un cordón de soldadura formado sobre un acero de alta aleación considerando la influencia de todos los parámetros. En el presente trabajo de investigación se demuestra que en base al modelo “ULIRAM” es posible predecir nuevas composiciones químicas para materiales de aporte, para ello se han preparado probetas con el material de aporte ASM 1ª con 1.8% de aleación aplicado independientemente sobre los materiales base de ASM 1B con 10.60% y 11.30% de aleación, el efecto del carbono, cromo, profundidad de soldadura se ve reflejado en los modelos matemáticos “ULIRAM-1 y ULIRAM-2 desarrollados con datos experimentales. Estos modelos permiten calcular la dureza del cordón de soldadura en función de la cantidad de carbono, cromo y la profundidad del depósito y hacer predicciones para valores que no se han podido medir. La validez de los modelos serán evaluados teniendo como base el ASM 1B, 10.60% de aleación y ASM, 11.30% de aleación con 3 profundidades y sus correspondientes composiciones químicas. Con la ayuda del modelo ”ULIRAM” será posible iniciar estudios en la fabricación de nuevos materiales de aporte. Los modelos matemáticos de los Nuevos Materiales de Aporte ULIRAM-1 y ULIRAM-2, obtenidos con el software statgraphics plus y simulados con el software Matlab son: Material de Aporte ULIRAM-1: HV igual 129.662 + 920.672%C - 53.5243%Cr + 52.9418X con un coeficiente de correlación de 99.93%. Material de Aporte ULIRAM-2 HV igual 128.815 + 1110.99%C - 76.951%Cr + 43.5185X con un coeficiente de correlación de 96.76%.
Discipline: Ingeniería Metalúrgica con mención en Metalurgia de Transformación y Ciencias de los Materiales
Grade or title grantor: Universidad Nacional Mayor de San Marcos. Facultad de Ingeniería Geológica, Minera, Metalúrgica y Geográfica. Unidad de Posgrado
Grade or title: Magíster en Ingeniería Metalúrgica con mención en Metalurgia de Transformación y Ciencias de los Materiales
Register date: 20-Aug-2013; 20-Aug-2013



This item is licensed under a Creative Commons License Creative Commons