Look-up in Google Scholar
Title: Determinación de la velocidad óptima de sedimentación de flóculos formados con coagulante sulfato de aluminio tipo “A” de la planta de tratamiento de agua potable, Moyobamba
Advisor(s): Azabache Liza, Yrwin Francisco
OCDE field: https://purl.org/pe-repo/ocde/ford#2.11.02
Issue Date: 2019
Institution: Universidad Nacional de San Martín. Fondo Editorial
Abstract: Uno de los procesos más ampliamente usados en el tratamiento de agua es la sedimentación al cual se le atribuye la importancia que lo requiere, en la presente investigación se realizaron cuatro ensayos para determinar la velocidad óptima de sedimentación de flóculos formados con coagulante Sulfato de Aluminio tipo “A” de la planta de tratamiento de agua potable, Moyobamba, obteniendo resultados variables e inversamente proporcional al tiempo de sedimentación, expresados mediante el floc removido en términos porcentuales, las cuales muestran la curva óptima en los cuatro ensayos respectivos donde se obtuvo velocidades variables aplicando el coagulante a diferentes concentraciones como C1=10 mg/L, C2=15 mg/L, C3=20 mg/L, C4=30 mg/L, C5=40 mg/L y C6=50 mg/L en cada jarra con tiempos de sedimentación de t1 = 1 min, t2 = 3 min, t3 = 5 min, t4 = 10 min, t5 = 15 min, t6 = 20 min, t7 = 25 min y t8 = 30 min, con los resultados se presenta la curva: floc removido vs. Tiempo de sedimentación donde se muestran las eficiencias de las pruebas con agua cruda y coagulante Sulfato de Aluminio tipo A (Al2(SO4)3.14H2O) muestran eficiencias aleatorias positivas y negativas, sin embargo, a una concentración de 50 mg/L se observa una mejor eficiencia en todos los tiempos de sedimentación y una velocidad de sedimentación variable en cada jarra.

One of the processes most widely used in the treatment of water is sedimentation which is attributed the importance that requires it, in the present investigation four tests were performed to determine the optimal sedimentation rate of flocs formed with coagulant Aluminum Sulfate type "A" of the drinking water treatment plant, Moyobamba, obtaining variable results and inversely proportional to the sedimentation time, expressed through the floc removed in percentage terms, which show the optimal curve in the four respective tests where variable speeds were obtained applying the coagulant at different concentrations such as C1 = 10 mg / L, C2 = 15 mg / L, C3 = 20 mg / L, C4 = 30 mg / L, C5 = 40 mg / L and C6 = 50 mg / L in each jar with sedimentation times of t1 = 1 min, t2 = 3 min, t3 = 5 min, t4 = 10 min, t5 = 15 min, t6 = 20 min, t7 = 25 min and t8 = 30 min, with the results presents the curve: floc removed vs. Sedimentation time showing the efficiencies of the tests with raw water and coagulant aluminum sulfate type A (Al2(SO4)3.14H2O) show positive and negative random efficiencies, however, at a concentration of 50 mg / L a better efficiency in all sedimentation times and a variable sedimentation rate in each jar.
Discipline: ingeniería Sanitaria
Grade or title grantor: Universidad Nacional de San Martín. Facultad de Ecología
Grade or title: Ingeniero Sanitario
Juror: Tuesta Casique, Angel; Valverde Vera, Mirtha Felicita; Ayala Diaz, Marcos Aquiles
Register date: 29-Jan-2020; 29-Jan-2020



This item is licensed under a Creative Commons License Creative Commons