Look-up in Google Scholar
Title: Diseño de la capacidad portante del suelo del distrito de Saramiriza provincia del Daten, región Loreto
Advisor(s): Reategui Acedo, Ivan Gustavo
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 2017
Institution: Universidad Nacional de San Martín. Fondo Editorial
Abstract: The present investigation called "Design of the carrying capacity of the soil of the District of Saramiriza, Datem Province, Loreto Region", has as objective to determine the bearing capacity that allows to elaborate a zoning map of soil carrying capacity. The research methodology was descriptive, on which it was sought to specify and analyze the geological and geotechnical characteristics. According to these studies, the classification was determined by means of the SUCS method where the following types of soils were obtained: Inorganic limes of high plasticity (MH) humid expansive, somewhat unstable, of low bearing capacity, Inorganic limes of low plasticity (ML) little expansive of low carrying capacity, inorganic clay of low plasticity (CH) expansive, wet of low bearing capacity, these types of soils are classified as poor or bad in the general value of the foundation These soils (MH, ML, CH), have the fundamental characteristic of experiencing considerable volume changes through humidity, being very wet and unstable and contracting showing cracks in the form of crocodile skin on the surface when subjected to heat (Rays Solar The carrying capacity of the pits are as follows: C-01 = 0.73 kg /cm2,C-02 = 0.65kg / cm2, C-03 = 0.51 kg / cm2, C-04 = 0.68 kg / cm2, C-05 = 0.67 kg / cm2, C-06 = 0.66 kg / cm2, C-07 = 0.60 kg / cm2, C-08 = 0.83 kg / cm2, C-09 = 0.73 kg / cm2, C-10 = 0.79 kg / cm2, C-11 = 0.76 kg / cm2, C-12 = 0.81 kg / cm2, C-13 = 0.41 kg / cm2 C-14 = 0.47 kg / cm2, C-15 = 0.79 kg / cm2.

El presente Proyecto de Tesis denominado “Diseño de la Capacidad Portante del suelo del Distrito de Saramiriza, Provincia Daten, Región Loreto”, tiene como objetivo determinar la capacidad portante que permita elaborar un mapa de zonificación de capacidad portante de suelos. La metodología de investigación fue descriptiva, sobre la que se buscó especificar y analizar las características geológicas y geotécnicas. De acuerdo a estos estudios se determinó la clasificación mediante el método SUCS donde se obtuvieron los siguientes tipos de suelos: Limos inorgánicos de alta plasticidad (MH) húmedos expansivos, algo inestables, de baja capacidad portante, Limos inorgánicos de baja plasticidad (ML) poco expansivos de baja capacidad portante, Arcilla inorgánica de baja plasticidad (CH) expansivos, húmedas de baja capacidad portante, estos tipos de suelos son catalogados como pobre o malo en el valor general del cimiento. Estos suelos (MH, ML,CH), tienen por característica fundamental de experimentar cambios de volúmenes considerables a través de la humedad mostrándose muy húmedos e inestables y contrayéndose mostrando grietas en forma de piel de cocodrilo en la superficie cuando es sometido al calor (Rayos Solares) La capacidad portante de las calicatas son las siguientes: C-01 = 0.73 kg/cm2, C-02 = 0.65 kg/cm2, C-03 = 0.51 kg/cm2, C-04 = 0.68 kg/cm2, C-05 = 0.67 kg/cm2, C-06 = 0.66 kg/cm2, C-07 = 0.60 kg/cm2, C-08 = 0.83 kg/cm2, C-09 = 0.73 kg/cm2, C-10 = 0.79 kg/cm2, C-11 = 0.76 kg/cm2, C-12 = 0.81 kg/cm2, C-13 = 0.41 kg/cm2 C-14 = 0.47 kg/cm2, C-15 = 0.79 kg/cm2.
Discipline: Ingieniería Civil
Grade or title grantor: Universidad Nacional de San Martín. Facultad de Ingeniería Civil y Arquitectura
Grade or title: Ingeniero Civil
Juror: Huaman Torrejon, Carlos Segundo; Del Aguila Panduro, Ruben; Rioja Diaz, Jorge Isaacs
Register date: 11-Oct-2018; 11-Oct-2018



This item is licensed under a Creative Commons License Creative Commons