Look-up in Google Scholar
Title: Propiedades mecánicas y absorción del adobe compactado al incorporar polímero natural de penca, Cajamarca 2018
Advisor(s): Mosqueira Moreno, Miguel
OCDE field: https://purl.org/pe-repo/ocde/ford#2.01.01
Issue Date: 22-Jan-2019
Institution: Universidad Privada del Norte
Abstract: Esta investigación se ha realizado con la finalidad de determinar la propiedades mecánicas tanto compresión, flexión y absorción del adobe compactado al incorporar polímero natural de penca en porcentajes de 5%, 6% y 7%. Primero se realizaron ensayos de laboratorio para determinar las propiedades físicas de la tierra para elaborar el adobe compactado, luego se elaboraron los adobes patrones y los adobes con los diferentes porcentajes de aditivos de 5%, 6% y 7%. Los resultados obtenidos de las pruebas de compresión muestran que los adobes con el aditivo en los diferentes porcentajes aumentan hasta en 62.64% respecto a los adobes de muestra patrón que es de 14.55 kg/cm2 , en los ensayos de flexión llega a superar hasta en 44.46% sobre los adobes patrones que es de 14.8 kg/cm2 . Los adobes sometidos a absorción con aditivo natural de penca en porcentajes 5%, 6% y 7% logran resistir sin embargo de los adobes patrones no logran pasar la prueba. Se evidencia que la hipótesis se ha superado respecto al 10%, esto nos indica que el polímero natural de penca ayuda a mejorar las propiedades mecánicas y absorción del adobe, cumpliendo con los datos que se presenta en la norma E.080 que son de 10.2 kg/cm2 y 0.81 kg/cm2 de resistencia a compresión y flexión respectivamente.

This investigation has been carried out with the purpose of determining the mechanical properties of compression, bending and absorption of adobe compacted by incorporating natural polymer of penca in percentages of 5%, 6% and 7%. First laboratory tests were carried out to determine the properties of the earth to elaborate the compacted adobe, then the adobe patterns and the adobes were elaborated with the different percentages of additives of 5%, 6% and 7%. The results obtained from the compression tests show that the adobes with the additive in the different percentages increase up 62.64% with respect to the adobes of the standard sample which is 14.55 kg/cm 44.46% on the adobes patrones that is of 14.8 kg/cm 2 , in the bending tests it reaches even in a 2 . The adobes subjected to absorption with natural additive of penca in percentages 5%, 6% and 7% manage to resist, however, the adobe standards fail to pass the test. It is evident that the hypothesis has been exceeded with respect to 10%, this indicates that the natural polymer of penca helps to improve the mechanical properties and absorption of the adobe, complying with the data presented in the E.080 standard that are 10.2 kg/cm respectively. 2 and 0.81 kg/cm 2 of resistance to compression and flexion.
Note: Cajamarca
Discipline: Ingeniería Civil
Grade or title grantor: Universidad Privada del Norte. Facultad de Ingeniería
Grade or title: Ingeniero Civil
Juror: Mejía Díaz, Iván; Salazar Huamán, Erlyn; Aguilar Aliaga, Orlando
Register date: 31-Jan-2019; 31-Jan-2019



This item is licensed under a Creative Commons License Creative Commons